Search results

  1. C

    Quick question for all the welders on the forums?

    Do yourself a favor and DO NOT weld the tabs to the tie rod directly. Get yourself a beefy tie rod clamp and weld the tabs to that so you have full adjustability and also do not jeopardize the integrity of the tie rod.
  2. C

    PSC steering ram skid plate

    Here's a pic of mine. That's not getting damaged easily trust me. Is it possible? Sure but where would you even mount the skid? Under the tie rod welded to the axle tube?
  3. C

    LED Tail Lights

    I got some nice flush panels from rock auto
  4. C

    Tie rod

    Is that right? Wasn't a very hard hit either. I'll stick with my synergy
  5. C

    PSC Diff Cover Question

    Just got these delivered last night going to thrown them on tonight just wasnt sure about diff fluid capacity. These things look like they can hold more fluid than the stock covers so a little uneasy about putting the stock amount of fluid in there. Can anyone who runs these on their Rub give me...
  6. C

    Will cross caster affect "sticky steering"

    sorry here are the pics
  7. C

    Clearing 37's with a RK 2.5

    Not the best pics but hopefully it gives you an idea on how much to cut. I basically cut the whole thing and jb welded where the two pieces of sheet metal pinched together. Sanded then painted
  8. C

    Will cross caster affect "sticky steering"

    I forgot to add I made two adjustments to my driver side control arms at different times. The first adjustment was one full turn shorter. I was still experiencing pull but the steering was fine so I made the second adjustment of two full turns shorter for a total of three full turns. The other...
  9. C

    Will cross caster affect "sticky steering"

    These were my numbers before I made my drivers side arm two full turns shorter so I'm assuming its a lot lower now. been meaning to get new alignment numbers
  10. C

    Will cross caster affect "sticky steering"

    Just recently messed around with my control arm lengths at an attempt to combat some radial pull to the right. I made my driver side control arm about 3 turn shorter than my passenger. Shortly after my steering wheel does not return to center just sort of sticks or is jerky when it attempts to...
  11. C

    Two door owners

    Here's mine 2.5 lift 1 body lift on 37s
  12. C

    TF Rear Trackbar Question

    Whats going on guys got kind of a dumb question here but I failed jr high geometry so I need some help. After running my TF 2.5 coil lift for almost 3 years I am now noticing that my rear axle is offcenter about 3/4 of an inch towards the drivers side. So im looking to pull my drivers side tire...
  13. C

    My jk is doing something funny

    "My jk is doing something funny" funny how?
  14. C

    U-Joint Help

    Hey guys Im assembling my inner and outer shafts from ten factory but ran into a little issue. After I took the caps off the joints I went to put them through the yokes and they basically didn't fit. I was only able to get 1 end of a joint through the yokes and put the caps back on but the other...
  15. C

    U-joints, C clip vs. Full circle clip

    i just got these for the fronts they should do the trick. putting them in this week when i do my balljoints
  16. C

    Wave from Long Island

    Whats up guys been a JK owner for 3 years now and its become a huge part of my life. Im actually getting pretty stoked with a new build I got coming up in the next couple weeks. Ill be making the leap to 37s:rock:. Just wanted to say hello and im glad I found this site sucks didnt find it sooner.
Top Bottom