A good PSI??

FuriousDz

FuriousDz

New member
Whats a good psi to air down to for 37x13.50 on a NON beadlock 17x9 rim?

Ive been using 15 psi

Thanks
 
FuriousDz said:
Wow, you like to start early :D

Thanks!
10-12 is ok even without beadlocks?
Click to expand...

Only because you are running a narrow enough wheel (in comparison to your tire width) as that will help to hold your bead in place and, only "if needed".
 
FuriousDz said:
Wow, you like to start early :D

Thanks!
10-12 is ok even without beadlocks?
Click to expand...

Remember that you'll likely end up lower than what you started when you are done wheeling. If I start at 15, I am usually around 10 at the end of the day. If I start at 12 or 10 I've ended up around 4 or 5.

This is without beadlocks and 37s.
 
MTG said:
Remember that you'll likely end up lower than what you started when you are done wheeling. If I start at 15, I am usually around 10 at the end of the day. If I start at 12 or 10 I've ended up around 4 or 5.

This is without beadlocks and 37s.
Click to expand...

Thanks for the info.

4 or 5 :eek: I wouldnt think you can get that low safely without beadlocks
 
FuriousDz said:
Thanks for the info.

4 or 5 :eek: I wouldnt think you can get that low safely without beadlocks
Click to expand...

Agreed. Imagine how surprised I was to see that! That's why I typically just go down to 15. :yup:
 
Donny said:
A good PSI for stock tires on my 2013 Sport?

Donny
Click to expand...

You're pretty good to go with 12-15 psi on anything other than a bead lock, stock tires included. You can go lower but, you will run the risk of rolling a bead.
 
We ran a bunch of Colorado trails in September and 15psi worked good on 17x9 non-beadlock wheels with the stock 32" MudTerrain KM.
 
You must log in or register to reply here.
Top Bottom