Lots of pictures for this thread! The better part of my night (7:00-1:00) was spent labeling the wiring harness and stripping the motor down. IMG_20170902_185724.jpgIMG_20170902_192056.jpgIMG_20170902_192345.jpgIMG_20170902_211604.jpgIMG_20170902_214651.jpgIMG_20170902_215938.jpgIMG_20170902_221302.jpgIMG_20170902_223001.jpgIMG_20170902_224408.jpg there you can see my wiring harness mostly labeled and strung up for splicing later. IMG_20170902_224416.jpgIMG_20170902_230657.jpg I didn't know what these were to find out they are the knock sensors (duh). IMG_20170902_231220.jpgIMG_20170902_232524.jpgIMG_20170902_232531.jpgIMG_20170903_005543.jpg heads came off smoothly and will be sent to the shop come Tuesday.
Sent from my Life One X2 using WAYALIFE mobile app