ACM DISCOUNTED : Under Hood ARB Air Compressor Mount (May Require Trimming)

In Stock 2
Please be advised that this the original ACM mount and it is being offered at a discount. On some newer JL Wranglers and JT Gladiators, the L slot on the bottom of the mount may require some trimming to clear the lower factory stud. All sales are final.

The WAYALIFE ACM is an under the hood air compressor mount made for both the Jeep JL Wrangler and JT Gladiator and is designed to work with an ARB CKMA12 Air Compressor. This is a single 12V high output on board air compressor that I've used for years, on multiple Jeeps and have always found to work well. Installed up against the firewall and under the brake booster, you can access the air chuck from behind the fender liner near the shock tower or you can run a hose extension to a chuck located remotely on your Jeep. Also, if you're wanting to run ARB air lockers on your factory axles or on something like a Dana Ultimate UD60, Dynatrac ProRock or Currie Rock Jock, the ACM will help make plumbing air lines to the compressor super easy as well. The ACM comes in a powder coated semi-gloss black and includes all hardware necessary for installation. Removal of the driver side fender will help to make the installation easier but isn't necessary. Absolutely no drilling or cutting is required and it now comes with all metric hardware. All you need is a 10mm wrench to install the mount!

The ACM is made for direct bolt on use on 3.6L and 2.0L Turbo engines and with an automatic transmission. If you have a manual transmission, you may find it necessary to acquire longer bolts and washers to help space the compressor away from the ACM. This will allow the hard line that connects the master cylinder to the clutch slave to pass between them. The ACM will NOT work on a diesel, 4Xe or right hand drive JL or JT.


Click here to Watch: ACM Installation Video
Click here for ACM Installation Write-Up

BUY ARB Compressor & Accessories *:
ARB CKMA12 High Output On-Board 12V Air Compressor
ARB Air Hose Accessory Kit
ARB JIC-04 Extension Hose 1M
ARB 171314 Remote Hose Coupling Kit
Replacement Fender Clips

* Please note that the Amazon links posted are associate links and WAYALIFE does earn a small kickback for purchases made through them.

NOW AVAILABLE: Optional Heat Shield

ACM's typically ship within 1-2 business days and via USPS. The Handling option allows us to save you money by shipping Flat Rate. If you're ordering an optional heat shield with your ACM, the two items will need to be shipped in a bigger box and that does cause the total cost to be the same as ordering each individually.

Please be sure to review our Return Policy prior to placing your order.

CANADA & INTERNATIONAL ORDERS: Buyers are responsible for ALL duties and or brokerage fees that may be charged by UPS or USPS.

Price: $32.00
« Previous | Next »