2011 JKU build thread

Haven't done any on the carrier this week but did go out for a bit of a play last night thought I better post a pic up.

ImageUploadedByWAYALIFE1456279460.002119.jpg
 
ImageUploadedByWAYALIFE1456395292.922139.jpg

ImageUploadedByWAYALIFE1456395307.704486.jpg

ImageUploadedByWAYALIFE1456395325.439367.jpg

ImageUploadedByWAYALIFE1456395336.275574.jpg

ImageUploadedByWAYALIFE1456395354.660915.jpg

Got in and got a bit done today, still waiting on the latch to turn up and need to do the roto pax mounts and hi-lift mount.
Slowly getting there should have it nearly complete by the end of the week.
 
Rigs looking great! I love the trail table - very simple looking. Have you tried it out yet? Anything you would have done differently? :beer:
 
I'll let you know about the table after this weekends run but so far I'm super happy with it. [emoji108]🏻
I'll post up some photos of the carrier in a few minutes, it's mounted but still needs the roto pax mounts and highlift mount put on.
 
So I forgot about the carrier photos the other day so I'll try and do that later but here are some photos from the weekend. Had a great time and only managed to break one flare. Pretty happy about that's as there was no body damage :)

ImageUploadedByWAYALIFE1459116010.426950.jpg

ImageUploadedByWAYALIFE1459116029.845860.jpg

ImageUploadedByWAYALIFE1459116048.380214.jpg

ImageUploadedByWAYALIFE1459116071.434821.jpg

ImageUploadedByWAYALIFE1459116084.919633.jpg

ImageUploadedByWAYALIFE1459116096.753509.jpg
 
ImageUploadedByWAYALIFE1459678104.189287.jpg

ImageUploadedByWAYALIFE1459678122.655866.jpg

ImageUploadedByWAYALIFE1459678143.159911.jpg

ImageUploadedByWAYALIFE1459678156.510937.jpg

Still not powder coated and needs the roto pax mounts but I'm moving to the other side of the country this week so it's going to be a while before I get setup and find a workshop where I can continue working on it.
 
Not at all but I do get a slight noise out of the latch over big bumps, I'll address that when I get a chance [emoji106]🏻
 
ImageUploadedByWAYALIFE1471489387.053249.jpg

Still working away on the other side of the country but managed to sell the ARB bumper so now just need to get home and clean the front end up so the new one can go on.
 
IMG_1477080808.942115.jpg

Nothing really exciting to update but reinstalled the plastic factory bumper to keep it road legal and removed the plastidip from the grille so it can be re-done. I'll also need to stick the J back on, anyone have any ideas on what the best glue to use is?

PSC Bumper should be here on Tuesday so I'm keen for that!!


Sent from my iPhone using WAYALIFE mobile app
 
IMG_1477300725.950160.jpg

Just been giving the jeep an overall birthday, painting all the black bits again, giving her a polish, going to re dip the grille and just getting everything ready for the PSC bumper to go on tomorrow [emoji106]🏻


Sent from my iPhone using WAYALIFE mobile app
 
Finally the PSC brawler lite showed up so I wasted no time unboxing it and bolting it on. Need to make up some new brackets to mount the light bar and hopefully getting a warn high mount next week. Overall I'm really happy with the fit and quality of the poison spider bar and such a breeze to install [emoji108]🏻
IMG_1477480645.517795.jpg
IMG_1477480659.344325.jpg
IMG_1477480675.961523.jpg
IMG_1477480687.781158.jpg


Sent from my iPhone using WAYALIFE mobile app
 
Top Bottom