35s with no lift

[Ryan53]

New to WAL! Slowly building my 2010 JKU and just put 35x12.50R17 toyo mts on it. I love the low and wide look it has after I cut the stock fenders down. Yes I plan to lift it but being employed by the military that will take awhile. I wanted to see who else has this setup because personally I think it looks mean!

 

[catahoula]

Looks good and welcome!

 

[Ginz]

No rubbing? Did you use spacers?

 

[2nd.gunman]

New to WAL! Slowly building my 2010 JKU and just put 35x12.50R17 toyo mts on it. I love the low and wide look it has after I cut the stock fenders down. Yes I plan to lift it but being employed by the military that will take awhile. I wanted to see who else has this setup because personally I think it looks mean! View attachment 201766

Welcome to WAL! Looks awesome

No rubbing? Did you use spacers?

Looks like procomp steel wheels too me. 4.5" backspacing

 

[Ryan53]

Welcome to WAL! Looks awesome




Looks like procomp steel wheels too me. 4.5" backspacing

Yea your right, and yes I used 1.5" spacers. There is zero rubbing

 

[Ginz]

Ok cool, thanks. Looks great!

 

[Warebear]

I'm running 35s on a EVO Leveling kit, and 1.5" spacers. I suggest bump stop extensions after eating up my fenders on this last trip. Sweet looking rig though man! [emoji481]

 

[GregMort13]

I'm running 35s on a EVO Leveling kit, and 1.5" spacers. I suggest bump stop extensions after eating up my fenders on this last trip. Sweet looking rig though man! [emoji481]

I ran the leveling kit on my 4 door. Cut your fenders and use hockey pucks as bumpstops [emoji106] no more rubbing

 

[Chad]

Nice rig! You did a great job cutting your fenders.

 

[BPA]

looks great! I plan to do the same to my rig.

 

[Ryan53]

I'm running 35s on a EVO Leveling kit, and 1.5" spacers. I suggest bump stop extensions after eating up my fenders on this last trip. Sweet looking rig though man! [emoji481]

Thank you! And yea I thought about getting some extensions but I'm currently deployed so right now the wife just picks between her lifted xj and mine on which to drive to work[emoji23]

 

[2Cross]

Here is my sons JKR on 35s with fenders cut only


Here it is with 1.5" of lift from JKUR coil springs. We also plastidipped the rims black.


Rubbed a LOT before the unlimited springs. Only rubs a little now.

 

[Ryan53]

Here is my sons JKR on 35s with fenders cut only
View attachment 201820

Here it is with 1.5" of lift from JKUR coil springs. We also plastidipped the rims black.
View attachment 201821

Rubbed a LOT before the unlimited springs. Only rubs a little now.

Looks good! I like the black wheels.

 

[2Cross]

Looks good! I like the black wheels.

Yah[emoji106]
Much better after plastidipping.
Was a cheap build since I found the wheels/tires on CL for $400, springs for $80 from a WAL member and free to cut the fenders.

 

[Ryan53]

Yah[emoji106]
Much better after plastidipping.
Was a cheap build since I found the wheels/tires on CL for $400, springs for $80 from a WAL member and free to cut the fenders.

Wow, you can't beat that, that's awesome!

 

[AllAmericanInfidel]

New to WAL! Slowly building my 2010 JKU and just put 35x12.50R17 toyo mts on it. I love the low and wide look it has after I cut the stock fenders down. Yes I plan to lift it but being employed by the military that will take awhile. I wanted to see who else has this setup because personally I think it looks mean! View attachment 201766

That looks great! Instead of going for fenders with full coverage for 35s, I may try something like this and just trim them to cover the stock wheels and tires and do a leveling kit. Then I'll just swap over to the stock wheels and tires for inspection and run the 35s with stock trimmed flares the rest of the year lol.

 

[segt99]

no lift with Bushwackers

I also have 35s with no lift. I plan to lift her in the future but for now its not in the budget. I have only done mild off-roading with no rubbing so far. I love the look and how stable she is but I also love being a little higher, so eventually she will grow.

 

[Kilroy]

Looks good

 

[BigBoy]

I also have 35s with no lift. I plan to lift her in the future but for now its not in the budget. I have only done mild off-roading with no rubbing so far. I love the look and how stable she is but I also love being a little higher, so eventually she will grow.

View attachment 220677
View attachment 220678
View attachment 220679

What wheels are those? Looks great!

 

[segt99]

ProComp Wheels

What wheels are those? Looks great!

Thanks a lot.

Those are ProComp's new Series 2644 Syndrome wheel in Matte Graphite (17"). The tires are Cooper Discoverer ST/Maxx 35/12.50s.