Advice please: 33s and a lift that makes sense

DynoMax Exhaust

DynoMax Exhaust

Member
Tackerdown said:
Will he have to worry about his drive shaft boot if the spings lift to much or if he gets shocks and not shock extensions
That alow to much droop? Also curious, at what point does he need exhaust spacers?
Sent from my SPH-L720
Click to expand...


We suggest an exhaust pipe at anything from the 2.5" to 4" range but results may very.

RanchoExhaustpipe.jpg
 
RUMMY

RUMMY

New member
I'm running 285-70-17 with Teraflex leveling kit on mine which is 2 inch front and 1 inch rear . Cost me 130.00 looks great and took 2 hours to install . ImageUploadedByWAYALIFE1376363090.720864.jpg


Sent from my iPhone using WAYALIFE mobile app
 
I

In5ane1

New member
RUMMY said:
I'm running 285-70-17 with Teraflex leveling kit on mine which is 2 inch front and 1 inch rear . Cost me 130.00 looks great and took 2 hours to install . View attachment 44312


Sent from my iPhone using WAYALIFE mobile app
Click to expand...

Looks sharp! Running any aftermarket bumper or wench?

Sent from my SAMSUNG-SGH-I337 using WAYALIFE mobile app
 
aldaman

aldaman

Member
If 33s are the biggest tire you will be running, then I say get the 1.5" TF performance (coil) lift kit. Great kit with the least amount of parts to change out. You could also get Rubi shocks really cheap to add onto the lift. Below is my Buddy's Jeep that we installed the 1.5" TF lift. Looks and handles great. Gives the right amount of stance..

7623b37f7650542f390f093243a8d386_zps86a7f61b.jpg


f212442a8f8c550451a72e76144b1904_zps24f4dc1c.jpg


The next pic is my Jeep. It has a RK 2.5" lift on 33s. A lot of room left over, but I will be changing out my 33s for 35s in the near future..

4367df10be8026c178d8afc119123d06.jpg


bf94251e7d991682886daf9c0d9ee285.jpg


¥
 
Last edited:
Tackerdown

Tackerdown

Banned
DynoMax Exhaust said:
We suggest an exhaust pipe at anything from the 2.5" to 4" range but results may very.

RanchoExhaustpipe.jpg
Click to expand...
Thanks Max I wasnt sure and wanted the OP to be aware of the other issues he may run across with the newer JK's and lift hight.

RUMMY said:
I'm running 285-70-17 with Teraflex leveling kit on mine which is 2 inch front and 1 inch rear . Cost me 130.00 looks great and took 2 hours to install . View attachment 44312


Sent from my iPhone using WAYALIFE mobile app
Click to expand...

I like the look when the tires fill the wheel wells. Looks sharp

Sent from my SPH-L720
 
steve_r2

steve_r2

New member
Hi,
I'm running AEV Dualsport XT 2.5" with Mickey Thompson ATZ 33" and SumoSprings bumpstops and AEV Correction brackets.
Also have additional 180lbs weight up front ....winch etc.
Got to say really happy with how everything is ...looks, ride height settled a little over 2.5" I would recommend it.....but then I would seeing as I fitted it :cheesy:
 
I

In5ane1

New member
steve_r2 said:
Hi,
I'm running AEV Dualsport XT 2.5" with Mickey Thompson ATZ 33" and SumoSprings bumpstops and AEV Correction brackets.
Also have additional 180lbs weight up front ....winch etc.
Got to say really happy with how everything is ...looks, ride height settled a little over 2.5" I would recommend it.....but then I would seeing as I fitted it :cheesy:
Click to expand...

Pics?

Sent from my SAMSUNG-SGH-I337 using WAYALIFE mobile app
 
I

In5ane1

New member
Just bit the bullet and ordered 2.5 rc spring lift and their discos. It should look good! Thanks for feedback!

Sent from my SAMSUNG-SGH-I337 using WAYALIFE mobile app
 
You must log in or register to reply here.
Top Bottom