Building Bruce thread

RockyJk

Active Member
I just found a set of 44's out of a rubicon with lockers and 4.56's for less then the shop here wanted to just do a gear swap, I'll know for sure tomorrow if I got them, if I did they'll be here in the next week or two.

Nice!!:thumbup:
 

TrailBear

New member
So no go on the axles, there were already sold. Just changed the oil and diff oil with some royal purple, rotated my tires, retorqed my wheel spacers, and swapped out the stock shocks with some rancho 7000's.
 

TrailBear

New member
Going to start the install of a 2.5" superlift tonight, added longer bump stops and jks quick discos as well.
 

IBeHeWhoIsJoshua

New member
Really good looking rig!! I Painted the headlight rings with Rustoleum Flat Black and made a huge difference with the lights (in my opinion)..
IMG_2432.jpg IMG_2435.jpg IMG_2451.jpg

If you don't like this pictures in your thread let me know I'll remove them. :thumb:
 

TrailBear

New member
ImageUploadedByWAYALIFE1396669945.570483.jpg
Out with the old
ImageUploadedByWAYALIFE1396669962.689376.jpg
New bump stop extension
ImageUploadedByWAYALIFE1396669977.506966.jpg
Old sport spring compared to the superlift spring
ImageUploadedByWAYALIFE1396669994.401242.jpg
New spring in, 20% done:)
 

TrailBear

New member
ImageUploadedByWAYALIFE1396676030.126950.jpg
Other side in and brake line drop brackets in.
ImageUploadedByWAYALIFE1396676098.945352.jpg
ImageUploadedByWAYALIFE1396676114.649815.jpg
Cycling the suspension.
ImageUploadedByWAYALIFE1396676178.771815.jpg
Rear end is finished, just need to fix my rookie error, put my sway bar links on the wrong side oops! I blame getting up at 2:15am all week, I'll finish it up tomorrow.
 

TrailBear

New member
Fixed my rear sway bar links this morning and tackled the front.
ImageUploadedByWAYALIFE1396761595.846552.jpg
New vs old.
ImageUploadedByWAYALIFE1396761635.713556.jpg
New bump stop
ImageUploadedByWAYALIFE1396761671.147455.jpg
All done.
ImageUploadedByWAYALIFE1396761692.782630.jpg
Drive way shot, with weight on the ground I netted a full 2.5" up front and about. 3" in the rear.
ImageUploadedByWAYALIFE1396761791.977420.jpg
Went for a test drive to stretch the legs.
ImageUploadedByWAYALIFE1396761846.011358.jpg
ImageUploadedByWAYALIFE1396761875.333184.jpg
Bump stop at work.
ImageUploadedByWAYALIFE1396761911.399084.jpg
The other side is still seated.
ImageUploadedByWAYALIFE1396761946.976825.jpg
Overall I'm happy with the lift, there are a few items that they could have included in the kit, but it is really more of a budget kit, so for what it is, it works pretty good. The ride is good to me, we all know it is subjective to the individual so take it with a grain of salt. The jeep handles the same as with the levelling kit, no harshness, no noticeable bump steer . The springs feel a little softer then my old set up as well.
 

TrailBear

New member
A few shots from my last few exploration trips around my area getting a better feel for the latest mods.

ATTACH]81212[/ATTACH]


ImageUploadedByWAYALIFE1398916513.854858.jpg
ImageUploadedByWAYALIFE1398916541.948988.jpg
ImageUploadedByWAYALIFE1398916600.964779.jpg
The hole in the rock is an old mine shaft headed into the depths.
ImageUploadedByWAYALIFE1398916668.903475.jpg
ImageUploadedByWAYALIFE1398916703.035520.jpg
An old fsj cherokee I found.
 

Attachments

  • ImageUploadedByWAYALIFE1398916471.086174.jpg
    ImageUploadedByWAYALIFE1398916471.086174.jpg
    220.2 KB · Views: 61
Top Bottom