As I’m looking for new mods and upgrades I would like to get feed back on the common failures weak points to make sure I have them all addressed. Thanks for the help!!!!
Sent from my iPhone using
WAYALIFE mobile app
that's a tough one but I'd say the most common is to make a mod and think the Jeep becomes capable of doing more than it really can.
A heavy foot and not learning to pick good lines :thumb:
C-gussets - to handle the larger tires. avoid all the other trusses, sleeve etc... want a stronger axle, but a stronger axle.
I've got about 180k miles on my 2010, 1st mods I made were c-gussets, lift kit with arms, front drive shaft, 35's, tuner, gears
Since then i've upgraded to 37's with beadlocks, PSC hydro assist and Dynatrac PR44 up front, rear axle is still stock
Still on the same lift i begin with.
Hubs are my biggest recurring expense...
transmission flush once a year (37's and lots of miles), oil change every 6000 miles
I've had to replace front axle shafts once and rear axle shafts twice -- there are now vendors who warranty their axle shafts even for bent flanges, worth it if you plan to wheel often
Good luck and have fun