mchrisovergis
Member
Hey all, I have a 2009 JKU with LS3 swap, 6L80e, and now an Atlas2. I’m also running the Artec belly pan skid plat system (which I modified for LS oil pan). My situation is now with the Atlas, I seem to be limited on ways to run passenger side exhaust into 1 pipe (driver side) and out the rear. With the questionable route option I have, I am concerned about heat from exhaust being so close to gas tank, t-case, etc. see pics here:
Any help would be greatly appreciated.
Thanks
Sent from my iPhone using WAYALIFE mobile app
![Adjustments.jpg Adjustments.jpg](https://www.wayalife.com/data/attachments/305/305601-56b59692e6887b350322938e175065ae.jpg)
![Adjustments.jpg Adjustments.jpg](https://www.wayalife.com/data/attachments/305/305610-cf139bd78c6111b2a2302482e58835b6.jpg)
![Adjustments.jpg Adjustments.jpg](https://www.wayalife.com/data/attachments/305/305621-5e27e597e0a283d87d92fd75fcebea66.jpg)
![IMG_1324.jpg IMG_1324.jpg](https://www.wayalife.com/data/attachments/305/305625-753539c400503f05cc76a7b20748b92b.jpg)
![Adjustments.jpg Adjustments.jpg](https://www.wayalife.com/data/attachments/305/305635-26a5dba7f1cb4acdf7acf8bd2bb1a430.jpg)
![Adjustments.jpg Adjustments.jpg](https://www.wayalife.com/data/attachments/305/305643-dde5fe072d2b4e5129383fa2b4aa2c43.jpg)
Any help would be greatly appreciated.
Thanks
Sent from my iPhone using WAYALIFE mobile app
Last edited: