Hey fellas,
I just got the ACE Engineering pro stubby and rear. In stock, they only had the front with the 20" light provision and the rear with the double 6" light provision.
I purchased the 20" lifetime LED bar, and two 6" bars for the rear bumper.
They suggest wiring them to the factory fog light, and reverse lights, but I want to switch them independently.
The 20" draws 7.2 amps and the 6" draw 2.2amps each.
My question is what inline fuse I should go with? I was thinking 10amp for the 20" and a 7.5" for the two 6" (they will be fused before the relay, and a 5 post relay will turn them both on at once).
Am I thinking correctly?
I just got the ACE Engineering pro stubby and rear. In stock, they only had the front with the 20" light provision and the rear with the double 6" light provision.
I purchased the 20" lifetime LED bar, and two 6" bars for the rear bumper.
They suggest wiring them to the factory fog light, and reverse lights, but I want to switch them independently.
The 20" draws 7.2 amps and the 6" draw 2.2amps each.
My question is what inline fuse I should go with? I was thinking 10amp for the 20" and a 7.5" for the two 6" (they will be fused before the relay, and a 5 post relay will turn them both on at once).
Am I thinking correctly?