MedixJK build thread

[TennJK]

Ok need someone to double check me. Can someone verify this is the correct item for a '12 jku sport..

http://m.quadratec.com/products/product.php?pid=16100+1016

Also, will i be able to reuse my factory rear axle shafts?

Yep it fits and yeah you'll still be able to use the 30 spline shafts

 

[MedixJK]

Yep it fits and yeah you'll still be able to use the 30 spline shafts

Boom. Andy for the win.

 

[MedixJK]

Yep it fits and yeah you'll still be able to use the 30 spline shafts

Anyclue if the 44 r and p of a rubicon will work with this setup or no...

Edit: according to yukons website it will work with either.

 

[MedixJK]

So if i order the locker, i have the gears, and can reuse the shafts, what else do i need to get...?

 

[Mike_JK_Houston_711]

So if i order the locker, i have the gears, and can reuse the shafts, what else do i need to get...?

Does the locker come with all the wiring necessary? Also you'll need a switch system to activate the locker as well. Not sure if that comes with that purchase or not.

 

[MedixJK]

Does the locker come with all the wiring necessary? Also you'll need a switch system to activate the locker as well. Not sure if that comes with that purchase or not.

Got a switch system lined up, and ill have to check on the wiring. As far as the diff goes, do i need any sort of install kit or anything like that?

 

[Mike_JK_Houston_711]

Got a switch system lined up, and ill have to check on the wiring. As far as the diff goes, do i need any sort of install kit or anything like that?

Cool. Nope, as far as installing is concerned, the locker should come with everything. You will just need the tools in your garage to remove the diff cover, clean out the diff, etc...I'm sure the kit comes with gasket rtv silicone to seal back up your diff.

 

[Red Knight15]

Are you regearing or just adding locker?

 

[MedixJK]

Are you regearing or just adding locker?

Both ........

 

[MedixJK]

Cool. Nope, as far as installing is concerned, the locker should come with everything. You will just need the tools in your garage to remove the diff cover, clean out the diff, etc...I'm sure the kit comes with gasket rtv silicone to seal back up your diff.

Cool. Id say the shop has all that covered.

 

[Red Knight15]

Awesome , most likely be next spring before I get mine done

 

[MedixJK]

Awesome , most likely be next spring before I get mine done

What gears are you running?

 

[Red Knight15]

What gears are you running?

Most likely 5.13 with a rear Detroit and leave front open if I can't swing a PR44 at the same time. I'm sure I will do 37"s at some point.
I have 3.73 now

 

[MedixJK]

Most likely 5.13 with a rear Detroit and leave front open if I can't swing a PR44 at the same time. I'm sure I will do 37"s at some point.
I have 3.73 now

Youll be ok on these 35s till your ready forsomething different. Im on 3.21 lolol

 

[Red Knight15]

Youll be ok on these 35s till your ready forsomething different. Im on 3.21

It will be fine with my badass 3.8. [emoji16]

 

[MedixJK]

It will be fine with my badass 3.8. [emoji16]

Ha you damn right.

 

[MedixJK]

Phase 2 is officially underway.

Parts on order:
-Dynatrac Prorock 44 w/ Eaton elocker
-37x12.50 Cooper STT pros
-KMC Machetes (non-beadlock)
-Eaton elocker and regear (rear)
-Evo sliders
-Crawler Conceptz tire carrier
-switch pros 8

 

[Napalm]

Phase 2 is officially underway.

Parts on order:
-Dynatrac Prorock 44 w/ Eaton elocker
-37x12.50 Cooper STT pros
-KMC Machetes (non-beadlock)
-Eaton elocker and regear (rear)
-Evo sliders
-Crawler Conceptz tire carrier
-switch pros 8

Yay for phase two! That looks like an awesome list

 

[JKRicky]

Congrats! Very awesome list.

 

[swampdog]

Phase 2 is officially underway.

Parts on order:
-Dynatrac Prorock 44 w/ Eaton elocker
-37x12.50 Cooper STT pros
-KMC Machetes (non-beadlock)
-Eaton elocker and regear (rear)
-Evo sliders
-Crawler Conceptz tire carrier
-switch pros 8

Bro!!!! Nice!