Need lift suggestions for a 2 door

desertrunner

desertrunner

Active Member
If your interested in chopping your fenders I'm sitting on a stock 4 door Rubicon springs and shocks front and rear running 33s, after the bumper, winch and a few months of settling im at about 1 1/8" lift and it drives exactly like stock. Mine sits a hair nose low though but I'm gonna fix it all later when I can make the jump to 37s



20170111_162313.jpg

Sent from my SAMSUNG-SM-G890A using WAYALIFE mobile app
 
RedPool

RedPool

Member
The 2.5 inch puck kits are rather popular in my area. Most of the mall crawlers here are running the pucks with 35s. I drove a friends yesterday and it rode very well. If you are only wanting 33s with a little more clearance, I would go with the pucks or flat fenders. When I switched to flats, it gave the appearance of a small lift but never changed anything with the suspension. I could probably find a pic of mine on 33s with flats if you want. Just let me know.

Edit: It helps to proof read.
 
cozdude

cozdude

Guy with a Red 2-Door
I say skip the 33's and go right to 35's.

Here is my Jeep back on a 2.5" lift and 35's w/ stock fenders
IMG_7749.JPG
Here it is with cut fenders
IMG_3115.jpg

And if you want to go 3" here is cyoung16 Jeep with his newly installed 3" evo enforcer w/ 35's and full fenders. It rides amazing and I think smoother than my coilovers
IMG_7796.JPG
 
You must log in or register to reply here.
Top Bottom