J
JKDream
Guest
Bit of a weird one. Been having some issues ever since I installed my PR44 in regards to the track bar bracket. I couldn't get the bolt to stay tight whatsoever. I replaced the bolt, didn't help. Turns out the bushing is every so slightly too small for the bracket. This wasn't an issue on the OE axle because the bracket was so thin. But on the PR it wasn't putting enough clamping force onto the bushing.
With that said, does anyone know of a replacement bushing that fits synergy track bars that might be a bit bigger?
I jammed a grade 8 washer in between the two and it's good to go now, but would rather properly solve the issue.
Sent from my ONEPLUS A3000 using WAYALIFE mobile app
With that said, does anyone know of a replacement bushing that fits synergy track bars that might be a bit bigger?
I jammed a grade 8 washer in between the two and it's good to go now, but would rather properly solve the issue.
Sent from my ONEPLUS A3000 using WAYALIFE mobile app