T-Case leakage

[Guascone]

I don’t know if it is mandatory to have the o-ring between the nut and the splines or not...

I will check on the joke...I think that if it is full of oil, I will have probably found the leakage origin...




Sent from my iPhone using WAYALIFE mobile app

 

[QuicksilverJK]

Yes it needs to be there. Oil can leak from the splines if there is no seal on the end. Also this coincides with the oil sprayed everywhere. As it leaks it is being flung by the driveshaft yoke. Here is a good write up for the Adams front drive shaft.

http://www.adamsdriveshaftoffroad.com/front-jk-install/


Sent from my iPhone using WAYALIFE mobile app

 

[Guascone]

Thanks! I will follow it


Sent from my iPhone using WAYALIFE mobile app

 

[Guascone]

I found the leakage! The nut was not screwed well...I don’t know the reason but it lost the torque...I re -torqued and added silicon and loctite...


Sent from my iPhone using WAYALIFE mobile app