Thanks Again Everyone!
- Thread starter Slavens
- Start date
Honor2afault
Caught the Bug
Grats on the cage. You'll love it. Rockon and RockHard.
Sent from my SM-G900V using WAYALIFE mobile app
Sent from my SM-G900V using WAYALIFE mobile app
jeeeep
Hooked
congrats! love my RH cage, never realized how much I would use the hand grabs.
Tip - go over the whole cage and feel for any rough or sharp welds. I had a few welds I should've filed down but was in too much of a hurry to get it to powder coat.
Also, the instructions say to file down the top bolts or hardtop panel if it rubs - try these instead:
http://www.mcmaster.com/#low-profile-head-socket-cap-screws/=14eh4ub
I found the wind noise was not due to the RH cage but once the corner moldings are removed, it was the frame to windshield mount where the wind noise comes from. I packed it with some foam gap filler and no more noise, I don't have a better pic but it's behind here where you want to pack the foam
have fun with it!
Tip - go over the whole cage and feel for any rough or sharp welds. I had a few welds I should've filed down but was in too much of a hurry to get it to powder coat.
Also, the instructions say to file down the top bolts or hardtop panel if it rubs - try these instead:
http://www.mcmaster.com/#low-profile-head-socket-cap-screws/=14eh4ub
I found the wind noise was not due to the RH cage but once the corner moldings are removed, it was the frame to windshield mount where the wind noise comes from. I packed it with some foam gap filler and no more noise, I don't have a better pic but it's behind here where you want to pack the foam
have fun with it!
