Buneewunee
New member
So,,,,I put on a MBRP front full width winch bumper and a Smittybilt 9.5 winch. Now the front end dropped about 3/4 of an inch. My main concern is that I have now noticed that the height from the ground to the bottom edge of the fenders are all different heights on all four fenders (the front right and left sides are about a 1/4 inch off and the rear right and left sides are about a 1/2 inch off). Also, when putting on the front bumper, I had to cut off the crossbar that connects the left and right frame horns (per the instructions from MBRP). Anybody have any idea why this would happen (the difference in height)?