V Linker MC +, wiring location

[Trail Bud]

I have a the V linker MC plus, programmer.
Are the cable locations under the steering column? The cable to hook up the programmer. (See pic)



cables that needs connection

 

[kevman65]

Safety Gateway cables, left of steering column, back a little ways from knee bolster and UP.

Pain in the ass to get to, lay on your back and look up. You'll see the back side of the connectors, push in tab and wiggle each one out.

Good luck.

 

[bobfriesenhahn]

It requires suitable working conditions (not 117 degrees) and hands to get the security gateway cables off. I failed. It seems that if I had pushed the driver's seat all of the way back and removed a car from the garage, I might have succeeded.

I could finally find the connectors after removing the plastic panel below the steering column and looking up at the right angle.

 

[Trail Bud]

Thanks guys.

 

[jeeeep]

using something like a pick tool will help make it easier to press the tabs while working the plugs loose.

 

[kevman65]

There has been cases where it seems they have used some sort of adhesive on the connectors.

I know my `20 JT didn't have it, I don't know if your `23 JL will or not.

 

[Trail Bud]

I found the write up Eddie did on tire size correction. It shows how to access the plugs without too much trouble. Should have started with this.

 

[kevman65]

I found the write up Eddie did on tire size correction. It shows how to access the plugs without too much trouble. Should have started with this.

Well DUH, if you want the easy way out

 

[kevman65]

@Trail Bud

You might be interested in this product, so you only have to fight it once.

SGW Extension Cable – Z Automotive

www.zautomotive.com

 

[Trail Bud]

@Trail Bud

You might be interested in this product, so you only have to fight it once.

SGW Extension Cable – Z Automotive

www.zautomotive.com

I have them now. Just installed them yesterday. Thanks.