VIDEO : Tracking Down Noise on a ProRock 80 Axle and what it Took to Fix It

wayoflife

wayoflife

Administrator
Staff member
What started off as an annoying air leak in the ARB rear locker on our Dynatrac ProRock 80 lead to a much bigger problem and one that required the help of a good shop that really knows what they're doing to fix it. In this video collaboration we did with Disciple Off Road, you'll get to see the problems they found on Moby, our beloved Jeep JK Wrangler and what it took to get him ready for the trail again.


#jeep #wrangler #wayalife #jeepwrangler #jkwrangler #wranglerjk #jkjeep #jeepjk #discipleoffroad #dynatrac #pr80 #prorock80 #arb #arbairlocker #lockers #airlockers
 
wayoflife said:
What started off as an annoying air leak in the ARB rear locker on our Dynatrac ProRock 80 lead to a much bigger problem and one that required the help of a good shop that really knows what they're doing to fix it. In this video collaboration we did with Disciple Off Road, you'll get to see the problems they found on Moby, our beloved Jeep JK Wrangler and what it took to get him ready for the trail again.


#jeep #wrangler #wayalife #jeepwrangler #jkwrangler #wranglerjk #jkjeep #jeepjk #discipleoffroad #dynatrac #pr80 #prorock80 #arb #arbairlocker #lockers #airlockers
Click to expand...
Very cool! Good job guys!
 
ARB parts no longer made for that housing, what model was used? and is that what Disciple was referring to in another post about how they had to clearance the inside of the housing?

Good to see Moby, back on the trail, nice job Disciple (y)
 
jeeeep said:
ARB parts no longer made for that housing, what model was used? and is that what Disciple was referring to in another post about how they had to clearance the inside of the housing?

Good to see Moby, back on the trail, nice job Disciple (y)
Click to expand...
The ARB RD176 is what was needed for the 5.38 gear ratio (for the proper deck height). And yes several spots inside were pretty bad with raised metal/cast from the debris getting shot around.
 
Mike Pierson said:
Very cool! Good job guys!
Click to expand...
Glad you liked the video and yes, Jeremy and Chad did a great job (y)
Disciple Off Road said:
Awesome! So glad we were able to get him up and running again and hopefully better than before with an “always” working locker. It was also great seeing you guys rip him on the trails in shaver, breaking in the gears the right way 😎

Also, thanks for the opportunity to film and edit the video, was a ton of fun!
Click to expand...
Man, it's so good to be driving Moby again and it really is all thanks to you. Great job on the video too. Really looking forward to hitting more trails with you in the future.
DirtHeadDavis said:
Great video collaboration! Jeremy and Chad definitely are the guys to go to. Great editing and filming by them too!
Click to expand...
Yes indeed (y)
jeeeep said:
ARB parts no longer made for that housing, what model was used? and is that what Disciple was referring to in another post about how they had to clearance the inside of the housing?

Good to see Moby, back on the trail, nice job Disciple (y)
Click to expand...
Yes, that what it was and yes, it really is good to be driving Moby again.
 
You must log in or register to reply here.
Top Bottom