What was done to your rig this week?

[RockyJk]

Hahahahahahahahaha,

Thanks Luis !

Yup, now the JK8 looks beast[emoji108]

I didn't know you were selling your jeep. Do you still have your cj?

Yea had to get rid of it, I do still have the CJ will slowly start getting it back to its original state [emoji106]

 

[JKbrick]

Hahahahahahahahaha,

Thanks Luis !

Did you switch wheels with yours?

 

[Zstairlessone]

<img src="http://wayalife.com/attachment.php?attachmentid=193975"/> got my 4.88s in! Cant wait to have them broken in. Huge change from 3.21

You should talk with the shop about hanging your calipers from the brake lines - not the best idea.....

Nice change up, you will really feel the difference!

 

[ob_tj]

Had to lift the tj up to replace the crappy bent up drive shaft with a new beefed up one.

 

[Wolfpack14]

Finished the fender chop and put on 35"x12.50" trail grapplers.

 

[Red_rox_jk]

Got rid of the pinch seams in the rear fender wells.

 

[jkris]

Added flat fenders, 3/4 inch led side markers, and painted the rear fender wells with some rubberized undercoating. Next on my list is replacing the 2.5 inch budget boost with a real lift. It's slooowly coming along!

 

[AllAmericanInfidel]

View attachment 193975 got my 4.88s in! Cant wait to have them broken in. Huge change from 3.21

Just had the same upgrade done 2 weeks ago. I'm still smiling.

What size tires?

 

[LurancJK]

What size tires?

35s for now. Plan on getting 37s then try to find a Rubi 44 front

 

[swampdog]

What size tires?

35's now and plan on going 37's. 4.88 with the 6-speed 3.6 and 37's still should be in the sweet spot.

Now with 35's and the 4.88, I'm running 2800 RPM at 70mph in 6th gear, which doesn't bother me a bit.

 

[LurancJK]

Ah ive got the 6 speed 3.8

 

[NecessaryEvil]

Installed my CB antenna, bought a winch and some shackles, also got my stinger bent. Just need to finish up the bumper. Also bought a 20" led light bar for bumper.

 

[cozdude]

Installed my TMR door hinge liners
.
.

 

[CandAMudders]

Hey Cozdude

How hard was it to get the old plugs out? Did you use the removal tool from TMR or just a screwdriver or something? Mine haven't ever been off and it is 7 years old...figuring it is going to be a real bitch to get them off.

Installed my TMR door hinge liners
View attachment 194170 .
View attachment 194171 .

 

[cozdude]

Hey Cozdude

How hard was it to get the old plugs out? Did you use the removal tool from TMR or just a screwdriver or something? Mine haven't ever been off and it is 7 years old...figuring it is going to be a real bitch to get them off.

I used the removal tool and a hammer to pound them out. The lower hinge on both sides required me to use a screw driver as well to help free the top part a little

 

[rinkishjk]

Hey Cozdude

How hard was it to get the old plugs out? Did you use the removal tool from TMR or just a screwdriver or something? Mine haven't ever been off and it is 7 years old...figuring it is going to be a real bitch to get them off.

I used an 8mm socket, cause they didn't have the tool when I bought them.

 

[Red_rox_jk]

Capped the rear frame rails. Getting ready for D-link tabs.

 

[jjlong]

Got a Springtail solutions gate table/ molle bags

 

[Shantz]

Just finished installing my Teraflex Tire Carrier... so I can now fit my 35 on the back... LOVE IT!

 

[Rustyjk]

Installed an sPod and led cubes on the windshield with some Evo tabs. Also mounted my spare tire on the stock carrier. It will have to do for now until I can buy a better carrier.