What was done to your rig this week?

CaliforniaWheelin'

CaliforniaWheelin'

Member
JKbrick said:
How much lift did you get out of the 19/60 coils? I am considering doing this to lower mine a bit from my JKS coils, but I don't want it to ride like shit either


Sent from my iPad using WAYALIFE mobile app
Click to expand...

I got around a 1-1.5" out of the 19/60 coils I believe. It is definitely a stiffer ride, but that also depends on how light your rig is and what your idea of a stiff ride is. I liked it without the spacers but as soon as I added those, the suspension geometry changed and my shocks were maxed out. So I really didn't set it up right. I would bet that the 19/60s with appropriate shocks would be a pretty good set up!


Sent from my iPhone using WAYALIFE mobile app
 
Speedy_RCW

Speedy_RCW

Hooked
xxJWPxx said:
For me it was a combination of a few things.
Sound, which I liked but paired with my Magnaflow exhaust it was pretty loud and with a new baby I prefer it to be on the quieter side when he's riding along.
Greater chance of sucking in water vs. stock. The Banks intake is very open/exposed compared to stock.
Performance gains weren't noticeable if even existent.
Lastly and probably my number one reason was that I was concerned that if any thing went wrong with my engine that should be covered under warranty would not because the dealer/Chrysler would use my intake as an excuse to void my warranty somehow. Just didn't feel comfortable enough and would rather be safe than sorry on something that isn't a game changer modification.
Click to expand...

Right on. That all makes sense. Thanks for getting back to me.


Sent from my iPhone using WAYALIFE mobile app
 
WillyJKU14

WillyJKU14

New member
Not much just added a little width with some wheel spacers I got from Tiecka533 off the forum. Gives my basic Rubicon a little better look. IMG_1478301174.655358.jpg
Before
IMG_1478301208.763747.jpg
After.

Thanks again Tiecka533 when we cross paths [emoji482]are on me!


Sent from my iPhone using WAYALIFE mobile app
 
Chillin' The Most...

Chillin' The Most...

Member
I had a busy weekend last week. Friday night I installed Cobra Lt CB above my mirror.
IMG_1478363460.842136.jpg
I also installed Evo Quarter Pounder and Stinger.
IMG_1478363661.333043.jpg IMG_1478363680.450352.jpg
Saturday was and epic install day for me anyways. I just got my Rock Hard roll cage back from powder coating semi gloss and installed it. IMG_1478363938.034334.jpg IMG_1478363955.069900.jpg IMG_1478363969.122677.jpg
If that wasn't enough I wired up and installed my Switch-Pro. Mounted it on my roll cage for now. My kids like it their. Wanted to mount it to the left of the steering wheel but to scared at the moment to cut a whole in the dash to mount a clean look. IMG_1478364173.252171.jpg
And if that wasn't enough I tackled the Evo Leveling kit. Wasn't as hard to install as I though it would be. The ride is absolutely amazing. IMG_1478364360.836603.jpg


Sent from my iPhone using WAYALIFE mobile app
 
WJCO

WJCO

Meme King
Chillin' The Most... said:
I had a busy weekend last week. Friday night I installed Cobra Lt CB above my mirror.
View attachment 229635
I also installed Evo Quarter Pounder and Stinger.
View attachment 229636 View attachment 229637
Saturday was and epic install day for me anyways. I just got my Rock Hard roll cage back from powder coating semi gloss and installed it. View attachment 229638 View attachment 229639 View attachment 229640
If that wasn't enough I wired up and installed my Switch-Pro. Mounted it on my roll cage for now. My kids like it their. Wanted to mount it to the left of the steering wheel but to scared at the moment to cut a whole in the dash to mount a clean look. View attachment 229641
And if that wasn't enough I tackled the Evo Leveling kit. Wasn't as hard to install as I though it would be. The ride is absolutely amazing. View attachment 229642


Sent from my iPhone using WAYALIFE mobile app
Click to expand...

Lots of work. Looks great.
 
You must log in or register to reply here.
Top Bottom