What was done to your rig this week?

916razorback

916razorback

New member
big dr said:
Yesterday I finally got around to installing my Rock Hard Sport Cage! Took most of the day due to taking on the mission by my self. Today I tore it all out and took it out for powder coat. The uprights and the front to rear brace are going to be gloss black, the cross bars and clamps are going to be as close a match to the silver on the dash/ air vents as I can get.( I like some of the 2 tone cages I'v seen on this forum) I'll add another pick when the re install is complete next week. A big thanks goes out to Eddie and everyone who contributed to the installation thread!!! It made the job so much easier, and I'll be using the KC mount for my CB as well!!:beer::beer::beer:
Click to expand...

Damn it....now I want an aftermarket cage!
 
jnabird333

jnabird333

-
I got my steering gear back from West Texas Offroad mid-week so I planned to get our hydraulic assist installed on my Jeep this week/weekend but it looks like the paint dry time is going to prevent me from completing it.

When the box arrived I was a little surprised that the ram was bare steel. So, the first thing I did wad get that painted.

IMG_20150115_101140029_HDR.jpg


BLUE! (and several coats of clear)

IMG_20150116_162925500.jpg


Next my focus turned to the bracket. Since we do not have a d-link flip and raised track bar this was going to have to be a custom job.

So with that said; here are all the pieces of my home made bracket. I'm pretty pleased with them considering they were all made with a cut-off wheel , hand drill, and a grinder. :)

IMG_20150118_112640958.jpg


And then, all welded together and ready to be welded to the axle.

IMG_20150118_131602985.jpg

IMG_20150118_131624764.jpg

IMG_20150118_131639283.jpg
 
SFNick

SFNick

New member
jnabird333 said:
I got my steering gear back from West Texas Offroad mid-week so I planned to get our hydraulic assist installed on my Jeep this week/weekend but it looks like the paint dry time is going to prevent me from completing it.

When the box arrived I was a little surprised that the ram was bare steel. So, the first thing I did wad get that painted.
Click to expand...

Wow cant believe the ram wasn't painted. Looks good that color though......How long was the wait for this? I'm trying to decide If i want one from them or Trail gear & tap my own box.
 
jnabird333

jnabird333

-
SFNick said:
Wow cant believe the ram wasn't painted. Looks good that color though......How long was the wait for this? I'm trying to decide If i want one from them or Trail gear & tap my own box.
Click to expand...

I lost 8 days to shipping (there and back) they only had the gear for 4 days.
 
10frank9

10frank9

Web Wheeler
Installed the Daystar switch panel. Wow it's NOT just a "plug and play" item. I had to "contour" the panel because it kept popping off.

Also I had to trim the back of the panel a bit. But I got it to work... :banghead:

ImageUploadedByWAYALIFE1421637960.601838.jpg
 
You must log in or register to reply here.
Top Bottom