Mauser gets some EVO swag!

Status
Not open for further replies.
Thanks!

Here are a few shots of the slabs on the carrier with the Caddy. Something to note is with the additional backspacing, you will have to get creative to get the tire pressure mounted against the carrier tubes. If you scroll up a few posts, you'll see my solution and it definitely holds the 120lb+ tire/wheel very solidly.

Hope this helps!

Awesome! Thanks!
 
Great build and great looking Jeep. I still love the look of the AEV full width bumper. Best looking bumper IMO if you're keeping stock fenders.
 
Great build and great looking Jeep. I still love the look of the AEV full width bumper. Best looking bumper IMO if you're keeping stock fenders.

Thanks! I've been a big fan of the bumpers. Their fit and finish is perfect and really compliments the factory fenders nicely.
 
Time for a busy day in the garage!
1426259881331.jpg

* 500mi gear inspection and fluid change
* Reinstall front driveshaft - J.E. Reel 1350 (was out for vibration troubleshooting)
* sPod install with OTRATTW switches
* Rigid Diffused Dually install on tire carrier mast
* Warn Power Interupter
*Degrease front left undercarriage due to a bit of diff fluid venting during break in
* Synergy Track Bar frame side bushing replacement

Not pictured (haven't been delivered by Brown Santa quite yet) :
* EVO Front Lower Control Arms
* LED Rock Lights

Woo hoo! :)
 
Last edited:
Time for a busy day in the garage!
View attachment 130386

* 500mi gear inspection and fluid change
* Reinstall front driveshaft - J.E. Reel 1350 (was out for vibration troubleshooting)
* sPod install with OTRATTW switches
* Rigid Diffused Dually install on tire carrier mast
* Warn Power Interupter
*Degrease front left undercarriage due to a bit of diff fluid venting during break in
Not pictured (haven't been delivered by Brown Santa quite yet) :
* EVO Front Lower Control Arms
* LED Rock Lights

Woo hoo! :)

Good luck, looks good.
 
I hate wiring!! That would be a busy 2 days in the garage for me! Good luck, enjoy a beer when your done, or earlier.:beer:
 
Got a handful of things on my list done today.

* Both diffs got inspected and serviced with 85w140 Royal Purple. Everything looked great with no metal flakes or chips in the oil.

1426292786624.jpg

* sPod went in along with the OTRATTW switches. For anyone needing custom switches, Jim at OTRATTW is great and truly understand the meaning of customer service. I'm lucky to work just down the street from him and was able to visit his shop. Big thumbs up!

1426292728573.jpg1426292739899.jpg
1426292751191.jpg

* Made a custom bracket and installed the Warn Power Interupter

1426292835532.jpg
1426292851183.jpg

* Got the Rigid Duallys mounted and hooked up

1426292907347.jpg
1426292919069.jpg

Hopefully I'll get the EVO arms tackled tomorrow.
 
Brown Santa showed up with some EVO Arms this afternoon! Woot!!
 

Attachments

  • 1426294411007.jpg
    1426294411007.jpg
    80.2 KB · Views: 340
EVO Lower Control Arms are in!

Before:
1426390895562.jpg

After:
1426390912627.jpg

Much mo betta!

Also installed a new set of Synergy Trackbar bushings. For some reason, the old bushings wore out in 11,000mi. They were replaced under warranty, however, a bit of a pain in the ass.

1426391000563.jpg
 
Not necessarily specific to the build, but I finally got around to creating a method for tracking service/maintenance on both my Jeep and the wife's van. Used Google Forms to create simple form that can be filled out each time I wrench on the vehicles. The main reason for doing this is so I have a reasonable record of maintenance in case I ever need to deal with a warranty claim. Also helps keep me in check with all the maintenance required on these things! :thumb:

 
Took a nice road trip to NE. California to a friend's cabin this weekend. What's better than a weekend with good friends, shooting, wheeling and cabin camping? :)


1427122806506.jpg
1427122775437.jpg
1427122789694.jpg
1427122836952.jpg
1427122854055.jpg
1427122882201.jpg
1427122919319.jpg
 
Status
Not open for further replies.
Top Bottom