STEER SMARTS has been Removed from WAYALIFE

C

Compliant

Banned
CJW said:
If you don't drill out the knuckle wouldn't you end up with a skinny shaft on the ball joint? At least on top of the knuckle where the drag link makes contact?
Click to expand...

CJW; Good question, the reverse taper top mount is stronger than the original joint. The no drill joint process has a large shoulder on the stud that contacts the knuckle face and a interference fit at the top of the factory drilled clearance hole. Plus we have a tapered sleeve that locks in the bottom of the stud to the factory reamed tapered hole. The stud was also induction heat treated to gain a good 30% added strength. Knuckle is stronger because you don;t have the lost material that everyone drills out. Overall, it's a very strong joint and easy to install.
Compliant
 
Compliant said:
CJW; Good question, the reverse taper top mount is stronger than the original joint. The no drill joint process has a large shoulder on the stud that contacts the knuckle face and a interference fit at the top of the factory drilled clearance hole. Plus we have a tapered sleeve that locks in the bottom of the stud to the factory reamed tapered hole. The stud was also induction heat treated to gain a good 30% added strength. Knuckle is stronger because you don;t have the lost material that everyone drills out. Overall, it's a very strong joint and easy to install.
Compliant
Click to expand...

Welcome to Wayalife! Do you happen to work for steer smart?
 
Videos

cozdude said:
Welcome to Wayalife! Do you happen to work for steer smart?
Click to expand...

Yes, I'm Ron North, Director, Steer Smarts Brand. My handle is Compliant. Wayalife visited our booth at SEMA and posted some real nice pic's of our YETI display. Here are a few links to some new videos that we developed. Let me know if you have any questions regarding our products.
Compliant
 
Compliant said:
Yes, I'm Ron North, Director, Steer Smarts Brand. My handle is Compliant. Wayalife visited our booth at SEMA and posted some real nice pic's of our YETI display. Here are a few links to some new videos that we developed. Let me know if you have any questions regarding our products.
Compliant
Click to expand...

Thank you for being up front about who you are. Shooting you a PM now.
 
2015 SEMA Steer Smarts YETI Jeep JK Wrangler Steering Components

Compliant said:
CJW; Good question, the reverse taper top mount is stronger than the original joint. The no drill joint process has a large shoulder on the stud that contacts the knuckle face and a interference fit at the top of the factory drilled clearance hole. Plus we have a tapered sleeve that locks in the bottom of the stud to the factory reamed tapered hole. The stud was also induction heat treated to gain a good 30% added strength. Knuckle is stronger because you don;t have the lost material that everyone drills out. Overall, it's a very strong joint and easy to install.
Compliant
Click to expand...

Thanks for the explanation. I'd be interested in seeing more detail on this. I'd like to see the shoulder design you're talking about. It sounds impressive if it's compensating for the joint shaft not to sheer off.
 
Steer Smarts has been Removed from WAYALIFE

tkettle said:
Jeeeep, can u post a picture of yours with the misalignment spacers please? Do you have a Synergy tie rod with Synergy ends?
Click to expand...

Steer Smarts has a no flop tie rod and draglink.

Compliant
 
Last edited by a moderator:
Compliant said:
Steer Smarts has a no flop tie rod and draglink.

Compliant
Click to expand...

You know, when I met you guys at SEMA, you seemed really nice. After you signed up on my forum and started pimping, I tried being nice and asked that you not solicit here as it is AGAINST OUR RULES. Clearly, you're not interested or are incapable of following those rules and now I see that you're a freeloader whos only purpose to be here is to PIMP your steering components and on my dime. Well, I'm here to tell you that I'm done with you and you are out of here. I can't tell you how disappointed I am with you and your company. And really, I'm disappointed in myself that I have recommended your steering system to so many people. Well, no more.
 
Please note, this is the PM that cozdude sent Steer Smart soon after they were first reported for pimping on the forum....

cozdude said:
Good Morning Ron,

Once again welcome to Wayalife! It looks like you have a great system. I just need to inform you of our rules of the forum though in case you missed it. In order to be a vendor on the forum you need to be a sponsor. Here is the verbiage right out of the FAQ

"CAN MANUFACTURERS OR VENDORS PARTICIPATE ON WAYALIFE.COM?
Manufacturers and vendors may only participate on WAYALIFE.com if they are a paying advertiser. Manufacturers and vendors found to be soliciting, discussing who they are or the goods and/or services they provide will have their account suspended."

I would ask that you please message Wayalife (Eddie) in regards to advertising. I hope you do cause myself (and I'm sure many others) are interesting in hearing more about it.

Thank you and have a great day,
-Steve
Click to expand...

and this is the response he got...

Compliant said:
Sounds good, I'll contact Eddie and get the information regarding advertising. Currently a supporting member of the Jeep Wrangler Forum.
Thanks,
Compliant
Click to expand...

So that it's clear, I NEVER heard from Compliant or should I say, not until he started PIMPING on the forum again today. Clearly, he is dishonest and not a company I will choose to do business with in the future or recommend again.
 
olram30 said:
Fuck free loaders. Just throwing it out there
Click to expand...

Seriously! You would think that WAYALIFE just magically appeared on the internet and for the benefit of vendors to pimp their goods like it's some kind of god given right :naw:
 
wayoflife said:
Seriously! You would think that WAYALIFE just magically appeared on the internet and for the benefit of vendors to pimp their goods like it's some kind of god given right :naw:
Click to expand...

Seems to be a trend on being a free loader. Sad really.
 
Not cool..

Eddie, this is why I came to the Wayalife forum. You call them out and keep them honest.
 
Last edited:
Damn, and I was just mentioning in someone's build thread how beefy and nice their steering looked. It's a shame they couldn't just do the right thing, follow the rules, and either stop posting or register as a paying sponsor.
 
You must log in or register to reply here.
Top Bottom