What was done to your rig this week?

I've never actually spoke with someone who has bought a Tera30. May I ask how much that cost you shipped to your door?

CARid less than $2k. free shipping and insurance paid for it from my accident. instead of stock replacement parts, i upgraded to Tera30, lowered gears and full Metal cloak front components. Still walked away w cash left over!


09 white jku 3" Teraflex, Metalcloak CAs, trackbar, tie, tera30 front axle, trutracs, 4.88s, 33" Nittos on Pro Comps, Besttop kit, quadrafloormats...
 
I followed the DIY Spod thread that pvanweelden posted a couple of months ago. It's a Daystar lower dash switch panel that has been trimmed to fit in a hole that I cut in the plastic windshield trim above the rear view mirror.

Sent from my SM-N900V using WAYALIFE mobile app
 

Attachments

  • 1401142249990.jpg
    1401142249990.jpg
    66.3 KB · Views: 803
Last edited:
I followed the DIY Spod thread that pvanweelden posted a couple of months ago. It's a Daystar lower dash switch panel that has been trimmed to fit in a hole that I cut in the plastic windshield trim above the rear view mirror. Here is a better picture of it. View attachment 85205

Sent from my SM-N900V using WAYALIFE mobile app

very nice.


Sent from my fRuit product using WAL
 
very nice.


Sent from my fRuit product using WAL

Thanks. It was a great write up and mod. Just took a little time. I am going to try a black silicone around the switch panel to clean up the cut edge.

Sent from my SM-N900V using WAYALIFE mobile app
 
Did a little clean up after the Moab trip last week and have finally gotten to the fine detail stage of the process.

My favorite metal polish, Meguiars 93



View attachment 84854



......and here is where my OCD shows itself. How can they be called EVO Envy links if people aren't envious of how clean they are?



View attachment 84855


Might as well touch up the bypass shocks too ;)



View attachment 84856



I can now sleep at night knowing my front and rear lower control arms are no longer filthy, dirty, and embarrassing for me to be seen on my jeep.....




View attachment 84857





View attachment 84858

You have inspired us to make our Envy links worthy of being envied :) To start, I had to get them cleaned up a bit...
ImageUploadedByWAYALIFE1401145037.244113.jpg

Did a little shopping for the next step in the process...
ImageUploadedByWAYALIFE1401145099.749743.jpg

I hope I can get them as shiny and pretty as yours are... I really am envious of how clean they are :)
 
Finally finish the end caps to my bumper
e5u8yry7.jpg

esehagu9.jpg


Changed where I mount my shovel (American flag there for today)
ge3avuvu.jpg


Changed high lift mount
u9adubu6.jpg


Welded a mount for my roto pax (thanks Paul)
a8upygah.jpg


And made a spreader bar for some 4 point harnesses.
uqugavam.jpg


Thank you Loony Toon for your help today and for the use of your shop.

Keep your head low and your powder dry.
 
Last edited:
Finally finish the end caps to my bumper
e5u8yry7.jpg

esehagu9.jpg


Changed where I mount my shovel (American flag there for today)
ge3avuvu.jpg


Changed high lift mount
u9adubu6.jpg


Welded a mount for my roto pax (thanks Paul)
a8upygah.jpg


And made a spreader bar for some 4 point harnesses.
uqugavam.jpg


Thank you Loony Toon for your help today and for the use of your shop.

Keep your head low and your powder dry.

Any time my friend.....:D

Sent from my SAMSUNG-SGH-I547 using WAYALIFE mobile app
 
Installed a hitch.
1401229816889.jpg
Thanks Sharkey for supplying the hitch.

Sent using the WAYALIFE mobile app
 
Last edited:
A little late, but over Memorial Day weekend a good friend and I worked on the Jeep!
First off, added some 2x3 LED lights (still waiting on the lower ones)
& finally trimmed the crash bar so the bumper will fit properly.....
ImageUploadedByWAYALIFE1401245620.027196.jpg
Headlights
ImageUploadedByWAYALIFE1401246005.571059.jpg
LED's only
ImageUploadedByWAYALIFE1401246027.558277.jpg
Next up, we wired the lights to a switch panel
ImageUploadedByWAYALIFE1401245764.054109.jpg
Then, we rigged up the CB and antenna.
ImageUploadedByWAYALIFE1401245802.113155.jpg
Today, I finally got around to swapping out the dash speakers... That wasn't fun.. But they sound great!
ImageUploadedByWAYALIFE1401245956.888648.jpg
 
Top Bottom