What was done to your rig this week?
- Thread starter 10frank9
- Start date
recon2067
Member
Dustyjkvegas
New member
I ordered new side steps, Installed the JKS license plate relocater and installed the front half of the Evo Level Kit that I picked up from another member this morning
Defcon3JKU
Member
Started installing my Evo skins and Trextop NX. Tomorrow will be other side and wiring for tail lights and reverse lights.
Sent from my iPhone using WAYALIFE mobile app
Sent from my iPhone using WAYALIFE mobile app
SHHHWAY
Member
Rb1boxer_3
New member
Awesome. Hey can you take a picture of how close they come to the body on the top corner. [emoji4]
Out in the Boonies
Napalm
New member
Thank you! I actually use both. I sometimes use my iPhone and sometimes I used my Canon DSLR. Most of the time I process the images using HDR or sharpen up the color.
Sent from my iPhone using WAYALIFE mobile app
World Traveler 76
New member
Warn Zeon 10s synthetic rope winch with Maximus-3 mounting bracket, and Maximus-3 d-ring loops with high lift jack points. Tight fit, some cutting and a bruised knuckle or two later. 4.5 hours worth of fun. 
Sent from my iPhone using WAYALIFE mobile app
Sent from my iPhone using WAYALIFE mobile app
2nd.gunman
Caught the Bug
Put the silver grille back in and fitted some LED rock lights.
Sent from my iPhone using WAYALIFE mobile app
Sent from my iPhone using WAYALIFE mobile app
sipafz
Caught the Bug
DIY vacuum pump relocation.
This is not a solution for after market bumper installation, but can clear the way to accommodate a winch inside your stock JK bumper. Follow along here:
Oscar's No Build Thread
http://wayalife.com/showthread.php?t=34227
This is not a solution for after market bumper installation, but can clear the way to accommodate a winch inside your stock JK bumper. Follow along here:
Oscar's No Build Thread
http://wayalife.com/showthread.php?t=34227
notnalc68
That dude from Mississippi
notnalc68
That dude from Mississippi
Had to wash mine, too. Still had a good coating of grime, from the ice storm, last month. I used 303 Aerospace Protectant, on the door handles, fenders, and all the black trim.
Sent from my iPhone using WAYALIFE mobile app
Sent from my iPhone using WAYALIFE mobile app
daddyusmaximus
New member
I took the traction bars off that came on the Jeep. You can tell that the lack of a front shackle put them under stress by the fact that they are no longer straight...
Went to test the flex, and now I think my front axle isn't powered, despite seeing the driveshaft rotate. Guess I'll have to check the hubs next.
Went to test the flex, and now I think my front axle isn't powered, despite seeing the driveshaft rotate. Guess I'll have to check the hubs next.
Defcon3JKU
Member
I haven't put them back on yet due to going out to powder coating. When I get them back just look at my build page under, " the building of defcon3."
Sent from my iPhone using WAYALIFE mobile app
Defcon3JKU
Member
Got my skins done on driver side this weekend. I have all the holes drilled and nutserted on passenger side but I'm freaking tired and ready for some sleep. This has been a job and I'm a novice so it's been really fun learning on my own Jeep. I should have the passenger side panels on tomorrow after work and then it's time to mock up the tire carrier. Once that's done it will be off to paint then installed for the last time. I also installed the J.W. Speaker headlights, Rugged Ridge aluminum hood latches, and a Trextop NX this weekend. Got my reverse lights installed to their location also, Rigid Industries A-Series cool white. Saving the wiring job for last.
Sent from my iPhone using WAYALIFE mobile app
Sent from my iPhone using WAYALIFE mobile app