Fusion 4x4 Axles / Dynatrac Dump

WJCO

WJCO

Meme King
TrailHunter said:
You going with 60’s?
Click to expand...

If I do it, yes. 60s , 40s, big lift. Won't be any time soon, but I like planning ahead.

jdofmemi said:
I recently purchased the Fusion hybrid 60/44 axles used from wtjstudios. After a few local trips, then hammering on them in Moab and Colorado (Where the hell were you at???), I have to say I am impressed with them. Unless 40+ tires and big power are in your future, these would hold up to most anything you throw at them. .
Click to expand...

Glad to hear you've been happy with them. Busy busy summer for me. Don't even feel like I had a summer. Covid bullshit didn't help.
 
A.J.

A.J.

Active Member
Still loving the Fusions. 60/60 combo for me. Got a little over 10k miles on them including a Rubicon/Fordyce trip, Tillamook twice, Dusy coming up soon and tons of local trails in between. No trailer so I drive it everywhere and it is my daily. Good to go!


Sent from my iPhone using WAYALIFE mobile app
 
TrailHunter

TrailHunter

Hooked
WJCO said:
If I do it, yes. 60s , 40s, big lift. Won't be any time soon, but I like planning ahead.



Glad to hear you've been happy with them. Busy busy summer for me. Don't even feel like I had a summer. Covid bullshit didn't help.
Click to expand...

Solid Plan... I like it.
 
JK_0311

JK_0311

Member
I’ve been looking at Fusion axles as well, they seem like a great axle choice and well tested by some of you already.

I was even thinking of starting with their builder axles and slowly building them to reduce some cost up front and learn as I go. Kind of win/win. Plus I have a welder buddy...always nice. It’s hard for me to swallow $12k + up front, harder to explain it to the wife as well. I’m hoping to have my plan in place soon because I’d like 40s by this time next year.


Sent from my iPhone using WAYALIFE
 
WiscoHR

WiscoHR

Member
WJCO said:
If I do it, yes. 60s , 40s, big lift. Won't be any time soon, but I like planning ahead.



Glad to hear you've been happy with them. Busy busy summer for me. Don't even feel like I had a summer. Covid bullshit didn't help.
Click to expand...

I’ve been looking at axles lately and I think my first choice would be the fusion Ford 10 inch or the Currie F9s


Sent from my iPhone using WAYALIFE mobile app
 
Last edited:
wjtstudios

wjtstudios

Hooked
WJCO said:
If I do it, yes. 60s , 40s, big lift. Won't be any time soon, but I like planning ahead.



Glad to hear you've been happy with them. Busy busy summer for me. Don't even feel like I had a summer. Covid bullshit didn't help.
Click to expand...

I do like what you are thinking [emoji848]


2015 JKUR AEV JK350
1985 CJ8 Scrambler
 
benatc1

benatc1

Hooked
A.J. said:
Still loving the Fusions. 60/60 combo for me. Got a little over 10k miles on them including a Rubicon/Fordyce trip, Tillamook twice, Dusy coming up soon and tons of local trails in between. No trailer so I drive it everywhere and it is my daily. Good to go!


Sent from my iPhone using WAYALIFE mobile app
Click to expand...

Sound like they've been through some paces. What's your thoughts on the Kingpins on road vs ball joint set ups? Or is it something you haven't even noticed

wjtstudios said:
Yeah, they are all built to order so you can get which ever brackets or none if you prefer. I’m sure the kingpins are overkill, but for a little bit more cost, they bring another level of confidence climbing those walls in Moab. Timing for the last set was about 6 weeks verses the UD60s where could be a week out. But if you’re planning ahead, it’s not as big of an issue.


2015 JKUR AEV JK350
1985 CJ8 Scrambler
Click to expand...

That's not too bad of a turn around in reality, I feel like that decision is planned out anyway but I do understand why some want that quick turn like UD60s can provide




Sent from my HD1905 using WAYALIFE mobile app
 
MericaMade

MericaMade

Active Member
zimm said:
Why? What did they do?
Click to expand...
WJCO said:
I know this is an old JK thread, but I'm curious if you ever got these Fusion axles? Any thoughts? There is a chance (yes a slight chance) that I may have some fun with the gladiator in the future, and more fun requires bigger axles :D . Obviously Dynatrac is out due to ethical and moral reasons for my own standards. I know many have been pleased with Danas which is an option, but I'm curious about these Fusion ones also. I'm also hearing rumors that Currie may be coming out with something new and exciting. Either way, let me know if you ever went through with this and your thoughts. Looks like it's been about a year since this came up.
Click to expand...
Was it the Chinese tire burnout that killed it for you?

Sent from my SM-G986U using WAYALIFE mobile app
 
Weebz

Weebz

Caught the Bug
Just reiterating most of what Bill said but I could not be happier with my Fusion axles. I have beat the living piss out of them since purchased and they haven’t even flinched. Between Pritchett and Billings Canyon I can say without question I have ALL the confidence in the world with the set up. I absolutely love my King pin setup and 14 bolt rear. Dan at Fusion has always been a phone call away and very responsive. My own abuse did sheer off a diff cover bolt in the housing but that has really been my only issue and Dan sent me out some spare bolts overnight with no questions. I strongly recommend you give him a call when making a decision. I spent hours upon hours on the phone with him planning my build, going over my needs and he was happy to help and talk through it all.
 
fiend

fiend

Caught the Bug
Weebz said:
Just reiterating most of what Bill said but I could not be happier with my Fusion axles. I have beat the living piss out of them since purchased and they haven’t even flinched. Between Pritchett and Billings Canyon I can say without question I have ALL the confidence in the world with the set up. I absolutely love my King pin setup and 14 bolt rear. Dan at Fusion has always been a phone call away and very responsive. My own abuse did sheer off a diff cover bolt in the housing but that has really been my only issue and Dan sent me out some spare bolts overnight with no questions. I strongly recommend you give him a call when making a decision. I spent hours upon hours on the phone with him planning my build, going over my needs and he was happy to help and talk through it all.
Click to expand...

What width did you guys go with?


Sent from my iPhone using WAYALIFE
 
A.J.

A.J.

Active Member
benatc1 said:
Sound like they've been through some paces. What's your thoughts on the Kingpins on road vs ball joint set ups? Or is it something you haven't even noticed







Sent from my HD1905 using WAYALIFE mobile app
Click to expand...
Solid as a rock. Adjustment is easy when they do start to wear the bushing just tighten back up. 17ft lbs is just right so you don’t have to break out the fish scale and pull anything apart.



Sent from my iPhone using WAYALIFE mobile app
 
SLO

SLO

Member
fiend said:
What width did you guys go with?


Sent from my iPhone using WAYALIFE
Click to expand...

I went 72” and glad I did but I’m also running 4.75 offset. For 3.5 offset wheels, I’d probably stick with the 68.5 or whatever the factory width is.
 
You must log in or register to reply here.
Top Bottom