My billet rubi build

Curious what was going wrong with the lights and why JW's over TruckLites?

The kc would turn off intermittently. Kc blames it on their adapter harness and they sent me new harnesses a few times. They also warrantied both lights before as well. I went with the JW speaker because everyone that has them seems to love them and they look cool. I've always liked them but never wanted to pay the 800 or so that they were a couple years ago.
ImageUploadedByWAYALIFE1463257914.715972.jpg
 
The kc would turn off intermittently. Kc blames it on their adapter harness and they sent me new harnesses a few times. They also warrantied both lights before as well. I went with the JW speaker because everyone that has them seems to love them and they look cool. I've always liked them but never wanted to pay the 800 or so that they were a couple years ago.
View attachment 203273

That yellow would annoy the hell out of me. Looks like the cheap Chinese lights you get on eBay.
 
Long day on the trail today. We did Elvis, Woodpecker, Lower Ajax, Jack Handle and the mini waterfall on Box Canyon.

The up and over tested the strength of the Evo tire carrier and showed me that i needed to move the hi lift jack further up.
https://youtu.be/FVu3MHGVqKo
 
In preparation for KMC Jeep Bash I started buffing out all the desert pin striping from the doors.
Before - as you can see it wasn't terrible
ImageUploadedByWAYALIFE1465353077.534487.jpg
After
ImageUploadedByWAYALIFE1465353118.801829.jpg
ImageUploadedByWAYALIFE1465353161.239885.jpg
ImageUploadedByWAYALIFE1465353193.955261.jpg

There wasn't any way to remove the scratches from the hardtop so I ended up repainting it.
ImageUploadedByWAYALIFE1465353259.685516.jpg
Before
ImageUploadedByWAYALIFE1465353280.116899.jpg
After
ImageUploadedByWAYALIFE1465353303.495224.jpg
ImageUploadedByWAYALIFE1465353320.827361.jpg
ImageUploadedByWAYALIFE1465353337.492981.jpg
ImageUploadedByWAYALIFE1465353371.260740.jpg

I also decided on changing up the look of the front end by taking the poison spyder hood louvers down to bare aluminum.
ImageUploadedByWAYALIFE1465353440.664793.jpg
ImageUploadedByWAYALIFE1465353460.457376.jpg
ImageUploadedByWAYALIFE1465353482.883937.jpg
ImageUploadedByWAYALIFE1465353503.136314.jpg
I still have more sanding to do but I think it's looking pretty good.
ImageUploadedByWAYALIFE1465353592.329631.jpg
 
I've been hearing a squeaking noise coming from the right front while turning left for a couple weeks. I had a friend look at everything while I would get it to make the noise. We figured it was the u joint in the axle shaft. My family got me Ten Factory shafts for my birthday. During the replacement process I decided to repaint the front axle.
ImageUploadedByWAYALIFE1465354305.435211.jpg
ImageUploadedByWAYALIFE1465354318.874295.jpg
ImageUploadedByWAYALIFE1465354340.566845.jpg
ImageUploadedByWAYALIFE1465354361.658536.jpg
ImageUploadedByWAYALIFE1465354377.083953.jpg
ImageUploadedByWAYALIFE1465354389.116018.jpg

After replacement while driving I was happy to find out that the noise was gone.
 
Shiny ball joints lol build is looking awesome!

I had signed up my CJ for the jeep bash but I'm not going to be able to take :(
 
Shiny ball joints lol build is looking awesome!

I had signed up my CJ for the jeep bash but I'm not going to be able to take :(

Haha yeah they were looking pretty rough before but after some sandpaper and a little wire brush they look great. Are you still going to jeep bash just without the CJ?
 
Top Bottom