Recent content by onbelay

  1. onbelay

    WARN 62132 Power Interrupt Kit

    ..........
  2. onbelay

    WARN 62132 Power Interrupt Kit

    Totally agree. Speaking of hood locks, we installed the MOPAR hood lock (plus transmission oil cooler, new radiator, new water pump, new plugs, new plug wires, and horizontal headlight adjustment screws LOL) over Christmas break for this reason. We like the extra security, as we have a Genesis...
  3. onbelay

    CB pain in the A$$

    I'm running the 3' Firestik II. The SWR meter barely moves when I key the mic unless I'm around channel 20 (it might get to 1.3/1.4). It's on the tailgate, right next to all of this metal. Note, the Hi-Lift is not attached in this picture, but the SWR values were taken while it was installed:
  4. onbelay

    Rigids in LoD Rear Bumper

    Finished OK, this took some time, but here it is. 1. Removed powder coat. Paint stripper was more or less ineffective, so we had to use an angle grinder + flap wheel (80 grit), dremel, and orbital sander (80 grit, 150 grit, 220 grit final). 2. Squared out the existing round holes to...
  5. onbelay

    New Toyo Open Country R/T

    Sorry for the delay. I took out the Jeep 3 times over the last week and was very impressed with the tire's performance. In places where my ProComp XTreme Terrain tires got stuck in the mud (aired down to 15PSI), the Toyo RTs had no issues (running 30PSI). On my most recent run, I was with two...
  6. onbelay

    M.O.R.E. Dual Battery Tray Installation Write-Up w/ODYSSEY Batteries (2007-11 JK)

    You are describing the need for a dual battery system with an isolator (to separate them). If you run the batteries in parallel and connect the winch to one of them, you will most likely draw current from both, and deplete both. If you use an isolator, and again connect the winch to one battery...
  7. onbelay

    Installed Our Evo Rock Skins. :)

    We used a competing brand, but same idea: Even took video of using it, if anyone is interested.
  8. onbelay

    Installed Our Evo Rock Skins. :)

    Actually, no, that's the not the same one. We used the 5TUW5 - it looks like bolt cutters:
  9. onbelay

    Installed Our Evo Rock Skins. :)

    Someone asked me about the fit & finish of our Evo Rock Skins. I figured why not post here? I uploaded high-res close-ups of the skins after installation, and then a few smaller pictures of activities during the install. I HIGHLY recommend buying a tool such as the Westward 5TUW5 to crimp the...
  10. onbelay

    What was done to your rig this week?

    Evo Rock Skins Previous 3 weeks: Evo LCAs, Hotheads Headliners, Evo drag link flip kit, JW Speaker 8700 Evolution headlights, AC inverter installation on custom underseat bracket. Next week: Evo rock sliders. :) -Dawn
Top Bottom