So intermittently my blower motor just cuts out. I found awhile back that it was because the resistor connector melted and that it's a common problem. Just wiggling the harness a little would make it work and then stop again. I attempted to take it apart a few months ago and clean and separate all the melted parts and it fixed it until about a week ago. Come to find out, there is a repair kit from Mopar 05102406AA. So I got one and fixed it today. Luckily I was able to save the resistor itself. From what I read, sometimes that's not an option.
Here's what it looked like prior, the entire side of the connector melted away exposing the terminal pins:
0303181257.jpg
0303181258.jpg
Here's the repair kit, even comes with the connector block and new terminal pins:
0303181259.jpg
And about 30 minutes later, here's the finished product:
0303181403.jpg