AdrockTT
New member
I'm under the impression that everything is already raised on the pr60 to accommodate 3-4" of lift. Including the knuckles and that there's no need to add a track bar raise bracket or to flip the drag link.
Sent from my iPhone using WAYALIFE mobile app
Dynatrac isn't assuming anything. This axle is designed with their track bar bracket and steering arms to work with the tie rod provided with the kit and your factory drag link. I'm sure they don't take correct steering geometry lightly and developed this to work perfectly.
High Steer set up on this axle set is realistically only going to gain you additional clearance of the tie rod, but as Eddie stated, you'll likely need to notch the frame rails for the drag link.
Thank you both! That's what I thought I understood, but this discussion had be second guessing... It def has several positions available for a raised front track bar mount and we discussed corrected geometry. Thanks for the insight fellas