In The Shop - Disciple Off Road

[TheGrendel]

For Synergy, the tie rod is in the same location/height as factory. They do offer the "high steer" option which is just the knuckles pre-drilled for the draglink flip.

The RockJock high steer knuckles do in fact raise the tie rod up 2-3/4" though.

at what front lift height, do you recommend raising the steering geometry for JL/JTs?

 

[Disciple Off Road]

at what front lift height, do you recommend raising the steering geometry for JL/JTs?

For JL/JT, 4.5" of lift or more is where it is recommended to do a flip with a raised track bar bracket. Both need to be done together.

 

[TheGrendel]

For JL/JT, 4.5" of lift or more is where it is recommended to do a flip with a raised track bar bracket. Both need to be done together.

I’m at 3inches and will never go higher on this JT. Was just thinking down the line if I need replace the aluminum knuckles do I get standard height or raised steering.
Sounds like standard is best.

 

[Mike Pierson]

thinking down the line when I need replace the aluminum knuckles

FIFY

 

[TheGrendel]

FIFY

True. Not if but when.