Installing corners and armor on body

[Panda]

Haha...no need for 40's on Panda

Honestly I'm really happy the way it is now :yup:

 

[Crawler Kitty]

Looks good!!! BTW, does the your exhaust tip make Panda sound better that way?:cheesy::cheesy:

LOL ....nice catch!

 

[JAGS]

Looks real nice panda. You and kitty bringing one jeep or two for this years kick off run?

 

[Brankz]

Looks awesome!..........

 

[Panda]

Looks real nice panda. You and kitty bringing one jeep or two for this years kick off run?

Thanks JAGS, just one this time, too much gas $ for two

 

[Panda]

Looks awesome!..........

Thanks Brankz :thumb:

 

[hinrichs]

Did you have the skins coated? or just paint them at home?

 

[bkac]

Great job Panda. Looking awesome.

 

[Panda]

Did you have the skins coated? or just paint them at home?

I just painted them at home with a good quality rattle can, they are really hard to fit and bolt on without scratching I had to use C clamps and ratchet strap to snug them so I wanted to be able to touch up after install

 

[Panda]

Great job Panda. Looking awesome.

Thank you my friend! :thumb:

 

[hinrichs]

I just painted them at home with a good quality rattle can, they are really hard to fit and bolt on without scratching I had to use C clamps and ratchet strap to snug them so I wanted to be able to touch up after install

This may be a dumb question, but after you mark and drill all the holes, do you need to use the straps and clamps again to bolt them back on?

 

[Panda]

This may be a dumb question, but after you mark and drill all the holes, do you need to use the straps and clamps again to bolt them back on?

YES it really is a tight fit and a pita to get them to line up, it was a challenge lol

 

[Brankz]

Thanks Brankz :thumb:

See looks awesome I wanted and I almost install this but some people here told me not I will save again and buy them

 

[OverlanderJK]

This may be a dumb question, but after you mark and drill all the holes, do you need to use the straps and clamps again to bolt them back on?

You are supposed to fit them all and drill the holes before you paint or powder coat them.

 

[Rccrwlr]

Oh I know what it means just never thought I would here you say that, haha.

^^^this^^^

 

[hinrichs]

You are supposed to fit them all and drill the holes before you paint or powder coat them.

I was just wondering if it takes so much to fit them, wont they just be that much of a pain to reinstall once pulled for paint or powder.

 

[Panda]

I was just wondering if it takes so much to fit them, wont they just be that much of a pain to reinstall once pulled for paint or powder.

Yes I still had a very hard time installing the final time and had to touch up a few scratches even though I put rags and wood blocks where the clamps were

 

[OverlanderJK]

I was just wondering if it takes so much to fit them, wont they just be that much of a pain to reinstall once pulled for paint or powder.

Still a pain yeah.

 

[2013rubirick]

It isn't easy but here is the first side. .

 

[2013rubirick]

Here is the second side. .