1/22/2016
Issue when Driving Jeep Wrangler.
Transmission was stalling when pressing on gas. When trying to go in reverse the car would rev, but would not go in reverse. To fix it I had to go into park and then go back into reverse and then I could reverse the car. It seemed every time I had an issue it was after stopping and the vehicle went into eco-mode. After turning off the vehicle and restarting the problem was gone.
Full disclosure when I originally wired the backup camera, I used a T-tap and connected it to the jeeps 3rd brake light. Since that was the wrong way to power it I cut the red wire (left the ground connected to the 3rd brake light ground (T-tapped as well)) and crimped it to the provided cable for the backup camera.
Issue when Driving Jeep Wrangler.
Transmission was stalling when pressing on gas. When trying to go in reverse the car would rev, but would not go in reverse. To fix it I had to go into park and then go back into reverse and then I could reverse the car. It seemed every time I had an issue it was after stopping and the vehicle went into eco-mode. After turning off the vehicle and restarting the problem was gone.
Full disclosure when I originally wired the backup camera, I used a T-tap and connected it to the jeeps 3rd brake light. Since that was the wrong way to power it I cut the red wire (left the ground connected to the 3rd brake light ground (T-tapped as well)) and crimped it to the provided cable for the backup camera.
Last edited: