Doesn't look like anyone has answered your actual question about this, so lemme be the first.
I just installed this system over the weekend. As the product is good quality & it functions as advertised, there are a few design changes I feel are needed to make Innovative JK Products' product a more user-friendly install. The product is a method of mounting the ARB twin compressor under the front passenger seat and route air lines to both sides of the Jeep in order to run four lines (one to each tire) to fill simultaneously.
What I will do is mention challenges that I came across that were not mentioned in the installation instructions...
#1...the instructions indicate to rotate the compressor manifold so that the T-fitting has a lower profiled angle than it would if it were straight up. The issue with this is that the hole now sits lower under the compressor cover that it makes it impossible to seat the T-fitting all the way down. And I tried my hardest to turn that fitting all the way as far as it could go, but now I'm at the point where I can no longer fit a tool through the gap to unscrew it out, nor can I remove the cover to rotate the manifold to the original position because the T-fitting is in the way. So hopefully the amount I was able to screw the T-fitting down is sufficient.
#2...there is no mention or warning of the passenger airbag sensor getting tripped and disengaging the airbag if you detach the yellow connectors under the seat & then proceed to remove the anchor bolts in order to tilt the seat back as instructed. I made sure to disconnect the battery prior to doing this & then reconnected it when the install was complete, but the computer still killed the passenger side airbag (as shown by the red airbag indicator on the instrument panel). Now I have to take my Jeep into the dealership to get that sensor reset (more $$ out of my pocket).
Because of these issues, I say that Innovative JK Products has some R&D to do to come up with a more user-friendly design to allow for an install that keeps the customer from having to remove the passenger seat. Other than that, other challenges do occur, but they're noted in the instructions so you can prepare for them.
The idea is great & the quality is good!! And most importantly...it works as advertised!!
EDIT See my post in this thread...
Sent from my iPhone using
WAYALIFE mobile app