The building of Anvil II -- The Deuce

Today, I set the cruise to 70 mph. With 4.10 gears, & 315/70r17 tires, that measure about 33.75", the rpm's were about 2400. Once the gears are broken in, after the installation, I'll get a comparison.

IMG_5605.jpg


Sent from my iPhone using WAYALIFE mobile app
 
I miss the power it had stock. The chart seems pretty accurate, so I should be around 2800 rpm with 4.88. That's a little above stock rpm. I may have to slow down a little! [emoji13]


Sent from my iPhone using WAYALIFE mobile app

For a JK, 2800 isn't much to worry about. I'm typically over 3k in Rubicat at highway speeds.
 
Great build so far. Always liked that color. If i bought another JK it would probably be that color. Your build so far is very similar to what i have plans for just moving very slow at the moment for my build.
 
Great build so far. Always liked that color. If i bought another JK it would probably be that color. Your build so far is very similar to what i have plans for just moving very slow at the moment for my build.

Thank you. Honestly, I could skip the $1300 on gears, and spend it somewhere else. It is acceptable with 4.10, on these tires. We are going to be pulling an R-Pod camper, that weighs about 2650 pounds, empty. That's the reason for the gear change, at this time.


Sent from my iPhone using WAYALIFE mobile app
 
Lol if that is the 3.5 Altima I am well aware of how quick those things can go. I catch myself speeding almost daily, especially after driving the Jeep over the weekend.
 
Top Bottom