The "Mid Life" buy thread

JK_Dave

JK_Dave

Caught the Bug
rdreng said:
3) Check your evaporative canister skid plate. You will need to move this over to prevent contact with the rear drive shaft during suspension articulation (or else you will rip the rubber boot on the driveshaft)
Click to expand...

I think Branman confirmed he replaced both f/r driveshafts with aftermarket CV ones so this shouldn't be an issue.
 
branman

branman

-
Finished my CB install, It is tight but works well until the sports cage goes in.

2014-07-18 11.30.13.jpg

2014-07-07 17.54.32.jpg

Was rubbing the front bumper pretty bad when flexed so I made a Stubby as a temp fix until I get my Quarter Pounder

2014-07-18 10.40.51.jpg

2014-07-18 11.24.15.jpg
 
branman

branman

-
No mods to the jeep but had to mod the garage bit to get it to fit.

Plenty of room! Had to relocate the opener and take the top off
2014-08-15 13.36.27.jpg

Like a glove :rock: I have to back in because the wind shield won't clear, if that gives you an idea of what I had to work with.
2014-08-15 13.37.07.jpg

Finally able to go top less :thumb:
2014-08-15 13.40.58.jpg

2014-08-15 14.22.15.jpg
 
utiadam

utiadam

LOSER
Having a garage is nice. Especially when you leave the top off for long periods. I can't wait til mine looks similar to yours.
 
gleno99

gleno99

Member
branman said:
No mods to the jeep but had to mod the garage bit to get it to fit.

Plenty of room! Had to relocate the opener and take the top off
View attachment 95718

Like a glove :rock: I have to back in because the wind shield won't clear, if that gives you an idea of what I had to work with.
View attachment 95719

Finally able to go top less :thumb:
View attachment 95720

View attachment 95721
Click to expand...

I'm glad I ended up going with the 3" enforcer. I don't have much clearance to get in my garage. I got spooled parking in the garage. This is my dd so leaving the top down is not an option.
 
branman

branman

-
noroad said:
Did you buy or make that one i have seen some cool builds on them?
Click to expand...

Thats funny you asked that, I bought this one, I was in a time crunch for a little overlanding trip this week and didn't think I could get one in time, I did consider just getting a grommet kit and some garden shade and just make one. :thumb:
 
branman

branman

-
DA RUNT said:
I wanted to trade my anvil top for a black top also. But the wife said she like the anvil top, so looks like i'll be keeping it lol :doh:
Click to expand...

Thats funny my girl friend likes this top better. Not sure how she will feel about the trex top coming soon.
 
branman

branman

-
Oil Pan Skid is in :thumb:

One tool that is not on the list is small hands! :doh: The one bolt above the tranny skip tab is a biatch!

2014-09-22 12.40.19.jpg
 
branman

branman

-
"Swivel Ratchet Wrench"Swivel Ratchet Wrench"Swivel Ratchet Wrench"Swivel Ratchet Wrench"

Put on my EVO Trans skid today

Did I mention get a "Swivel Ratchet Wrench"

2014-09-24 13.30.37.jpg

My new favorite tool "Swivel Ratchet Wrench"
2014-09-24 13.40.18.jpg

Also removed my Rubi rails to make room for my EVO Sliders - They get burned on tomorrow :rock:
2014-09-24 13.46.22.jpg

Swivel Ratchet Wrench"Swivel Ratchet Wrench"Swivel Ratchet Wrench"Swivel Ratchet Wrench"
 
You must log in or register to reply here.
Top Bottom