DAY 2 - OUT WITH THE OLD
We didn't get quite as much accomplished yesterday since we only worked on Moby for half the day, but there is no turning back now...
-Removed the 3.8L stock JK engine
-Removed the JK wiring harness
-Cut off stock engine mounts
-Cleaned up frame so new mounts can be burned in
-Began pulling apart LS to get it ready for the swap
Here are a some pics to add to what was already posted...
The 3.8L has been removed!
Cut here:
No turning back now:
Time to clean up the frame:
All clean and ready for new mounts:
Removing the stock JK wiring harness:
Taking apart the LS