Dana 44 leaking

[sassmouth]

This is what broke.
View attachment 266140

Sent from my SM-G950U using WAYALIFE mobile app

I thought so.

My original question was pertaining to the sensor located behind the carrier that indicates whether the locker is open or closed. You need to keep the plunger open while you put back in the carrier which is why i mentioned the wooden dowel tied to a string. I was curious if you handled that because if you didn't, the locker light on the dash will not work.

 

[deezus]

It was extended when i put it back.

Sent from my SM-G950U using WAYALIFE mobile app

 

[sassmouth]

It was extended when i put it back.

Sent from my SM-G950U using WAYALIFE mobile app

I'm glad to hear that. It sucks big time to forget that part and have to remove and reinstall the carrier again.

 

[kawimoto]

And lets say i got a new axle, prorock 44, with the eaton e locker. Could i run it to my existing Rubicon front locker switch?

Sent from my SM-G950U using WAYALIFE mobile app

yes existing switch will work fine, any rocker switch would

 

[deezus]

yes existing switch will work fine, any rocker switch would

Really? Ive had people twll me the opposite.

Sent from my SM-G950U using WAYALIFE mobile app

 

[rockwell]

Really? Ive had people twll me the opposite.

Sent from my SM-G950U using WAYALIFE mobile app

Yes it will work. Not the switch it's self technically, but the relay that the switch controls. Just use the 12v at the existing locker to power the E locker