Clark Collins
New member
I'm thinking of getting a 3" EVO enforcer lift kit and want to know if the stock front drive shaft would be a problem due to the pinion angle after correcting the castor. Also: is everything you need, except for the shocks, included in the kit. Is the drag link flip kit a necessary option and just exactly what does it do?
For the kind of wheeling I do, I don't think the King shocks would be justified and I would likely go with Bilstein 5100 shocks or possibly Rancho 9000. I'm not into high speed blasting down bumpy roads. The reason I'm considering lifting my rig more is that I need more ground clearance for some of the obstacles I want to clear. But don't want to go too high as my wife is short.
I've also been considering one of the Full Traction 3" lifts, but I've seen so many positive comments about the EVO plush ride coils that I think I would want them instead of the FTs. Has anyone compared these? I know that Eddie did a write up on installing the FT ultimate lift on Moby in the early years. That install replaced all 8 control arms, but I would also like to know about the FT kit that only replaces the lowers. Anyone have experience with that kit?
Any advice on what I'm considering would be appreciated. Thanks!
You can see what mods I have already in my signature.
For the kind of wheeling I do, I don't think the King shocks would be justified and I would likely go with Bilstein 5100 shocks or possibly Rancho 9000. I'm not into high speed blasting down bumpy roads. The reason I'm considering lifting my rig more is that I need more ground clearance for some of the obstacles I want to clear. But don't want to go too high as my wife is short.
I've also been considering one of the Full Traction 3" lifts, but I've seen so many positive comments about the EVO plush ride coils that I think I would want them instead of the FTs. Has anyone compared these? I know that Eddie did a write up on installing the FT ultimate lift on Moby in the early years. That install replaced all 8 control arms, but I would also like to know about the FT kit that only replaces the lowers. Anyone have experience with that kit?
Any advice on what I'm considering would be appreciated. Thanks!
You can see what mods I have already in my signature.