Steering gremlin

[aTX427]

Need welding assistance in Katy, TX please

Went full circle and ordered another Trail-Gear mount. It has a 1.75" mounting dimension, but fits perfect with washers on either side of the track bar. Are there members with proficient up hill welding skills willing to come over and help me burn this thing in?

 

[aTX427]

Does anyone know the OEM JK front track bar length by chance?


Sent from my iPhone using WAYALIFE mobile app

 

[WJCO]

Does anyone know the OEM JK front track bar length by chance?


Sent from my iPhone using WAYALIFE mobile app

Give me about 10 minutes and I can get you a measurement.

 

[WJCO]

32.25" from center of bolt to center of other bolt.

 

[aTX427]

Great - thank you very much. I've been banging my head against the wall with this Crown track bar and it's under sized at 31-3/16"


Sent from my iPhone using WAYALIFE mobile app

 

[WJCO]

Great - thank you very much. I've been banging my head against the wall with this Crown track bar and it's under sized at 31-3/16"


Sent from my iPhone using WAYALIFE mobile app

Strange, not sure why. We have a 2011 Sport. You could always cut it and sleeve it if you have the pipe laying around. I had to do that on my custom axle swap. We did it at a shop I used to work at all the time to keep axles straight to appease customers. No issues with it ever.

 

[aTX427]

Luckily I was able to find a new take off on CL this afternoon. Fit like a charm. Thanks again for your help.


Sent from my iPhone using WAYALIFE mobile app

 

[JKbrick]

Luckily I was able to find a new take off on CL this afternoon. Fit like a charm. Thanks again for your help.


Sent from my iPhone using WAYALIFE mobile app

Did they send you a rear bar for the front or something?


Sent from my iPhone using WAYALIFE mobile app

 

[aTX427]

No, it was a RHD track bar.


Sent from my iPhone using WAYALIFE mobile app

 

[jeeeep]

may be too late but did you look at Rusty's builder parts for the frame side track bar bracket?

http://www.rustysoffroad.com/builde...unts/rustys-trac-bar-frame-mount-weld-on.html

 

[aTX427]

I did see that one, but ended up making a custom bracket from the Synergy brace that I believe will be significantly stronger and ensures the correct position. It also allows mee to future proof the configuration if I decide to go DTD in the future.


View attachment 280124

 

[JKbrick]

No, it was a RHD track bar.


Sent from my iPhone using WAYALIFE mobile app

Surprised they don’t make 1 bar for both applications


Sent from my iPad using WAYALIFE mobile app