Dubaibentzen's build of Polar Bear

[Dubaibentzen]

Decided I wanted angled edges on the aft fenders as well. Very happy so far with the outcome.

 

[Dubaibentzen]

Used the "r" in the wrangler sticker as a reference for the angle in the front

 

[catahoula]

Sweet rig buddy!

 

[filterbiz]

Next was a Powertank PT10. No shops sell them in Dubai and I could not get the rollbar clamps. So I decided to get it fixed to the floor and the frame. A few nutserts helped and a homemade piece of wood to lift the bracket about an inch.
View attachment 171362 View attachment 171363 View attachment 171364

http://inlandempire.craigslist.org/cto/5325197307.html?lang=en&cc=us

 

[Dubaibentzen]

That's gonna look great! Can't wait to see them!

Me too. Now that I've looked closely at my Rubicon decal, I think it's actually burgundy instead of red. But let's see. If it looks crap, I'll just order a new set.

 

[Dubaibentzen]

Sweet rig buddy!

Thanks catahoula.

 

[Dubaibentzen]

Recieved the EVO offset license plate light mount today. Not sure if I really want this or something else since my winch is actually not offset, but centered. Let's see.

 

[Dubaibentzen]

I had to move the license plate to the right to make it fit to the center from the grill. I'm okay with this for now, but I think if I want to add lights later, I have to come up with an idea because they will all be shifted left of center. Got a traffic fine the other day, because my license plate was in my window... So the plate has to be there some way or another. Maybe a flip bracket later.

 

[Dubaibentzen]

Finished the cutting of the fenders and installed a couple of side marker lights. Found them at a local auto store. Super easy to fit. Drill, insert, tighten, connect wires, done.

 

[Dubaibentzen]

Tomorrow it's fun time again with a nice offroading trip with my buddies to Fossil Rock, Dubai. This time there should be no rubbing after cutting the fenders. Hard top is off, half doors on.

 

[mudmobeeler]

View attachment 174830 Recieved the EVO offset license plate light mount today. Not sure if I really want this or something else since my winch is actually not offset, but centered. Let's see.

Think they make one that is centered also.

 

[hinrichs]

Fender cuts came out awesome, good job :thumb:

 

[trailless]

Great build! Are those 33" tires? Also, what did you use to cut the fenders?

 

[Dubaibentzen]

Think they make one that is centered also.

Really? I haven't been able to find it anywhere. If you can send me a link, that would be awesome :thumb:

 

[Dubaibentzen]

Fender cuts came out awesome, good job :thumb:

Thanks hinrichs. It was fun cutting and hacking away on my almost new car. :yup:
The edge trim I bought was very bad quality, so I will look for another brand. It was all broken. At the moment running without edge trim, but I think the edge is a bit too sharp. Think I might go with a black edge trim...

 

[Dubaibentzen]

Great build! Are those 33" tires? Also, what did you use to cut the fenders?

Thanks trailless.
Yes, they are 33x12.5x17 Discoverer Cooper STTs.
Mostly I used a jigsaw and then a dremel for the tight places. Then a sawzall for the bigger plastic stuff underneath the fenders. And finally a fine file. I watched this youtube video a few times and he explaines it very well. https://www.youtube.com/watch?v=l_rH0A8Y4I4

 

[trailless]

It looks great! I got a great deal on some slabs and I'm trying to decide between 33s or 35s.

 

[mudmobeeler]

Really? I haven't been able to find it anywhere. If you can send me a link, that would be awesome :thumb:

I may have been wrong and was seen the one for the Pro Series bumpers instead of the 1/4 pounder.

 

[mudmobeeler]

It looks great! I got a great deal on some slabs and I'm trying to decide between 33s or 35s.

Not to hi jack, but go 35s. :thumb:

 

[Dubaibentzen]

Not to hi jack, but go 35s. :thumb:

Yeah. 35s :thumb: