deezus
New member
LCG?Ya with 37’s you could probably dial it down to 3.3/4” or so if ya wanted the lcg effect.
Sent from my iPad using WAYALIFE mobile app
Sent from my LG-H931 using Tapatalk
LCG?Ya with 37’s you could probably dial it down to 3.3/4” or so if ya wanted the lcg effect.
Sent from my iPad using WAYALIFE mobile app
Gotcha....yea I tested my flex with it low and it was 37" now it's 34.5 with it higher.....
What exactly did you do to pad up the brackets in back. Got a pic? TyNot completely from what i hear. Ideally you want to use valving to dial in a nitrogen shocks as well as the best spring weight based on the weight on all 4 corners.
Lowering tire pressure helps a lot. I run my 35 nittos at 30psi. With that alone I noticed better manners. Lowering the valve pressure helps as well.
Higher pressure does not always mean stiffer ride!!!! Between the coils and psi in the shocks I think I can get it where I want it without lowering the psi to much
Sent from my iPhone using WAYALIFE mobile app
What exactly did you do to pad up the brackets in back. Got a pic? Ty
Sent from my LG-H931 using Tapatalk
What did you do with gas line bracket?Don’t have the Jeep with me right now. I’ll grab a pic when we’re together again lol.
I put about a 3/4” rubber mud flap on both sides right above the shock mounts. It was really on the passenger rear making the noise.
Sent from my iPhone using WAYALIFE mobile app
That would be great because the directions said remove bolt from bracket but I don't think it said anything about afterwards.We left it where it was. I believe that was the reason for the rubbing on the driver side. Was 6 months ago. I’ll look as soon as I get home
Sent from my iPhone using WAYALIFE mobile app
That would be great because the directions said remove bolt from bracket but I don't think it said anything about afterwards.
Sent from my LG-H931 using Tapatalk
But it's not bolted back in right just floating in there? Just want to put padding in the right place on that side. You lifted body when you did it as well?If I remember right we left it in. It was noticed afterwords and didn’t want to undo body mounts again to remove it.
Sent from my iPhone using WAYALIFE mobile app
Thanks.Not 100 percent sure. I believe it’s tight. Yes I undid the rear body mounts enough to slide in the mud flap
Sent from my iPhone using WAYALIFE mobile app
Yea it's just floating in there...now just have to figure out if I should put the bracket on top towards tub or towards frame. What did you use btw?Yeppers, were you able to tell that’s where the noise was coming from
Sent from my iPhone using WAYALIFE mobile app
What kind of bumps are you running in back?Yeppers, were you able to tell that’s where the noise was coming from
Sent from my iPhone using WAYALIFE mobile app
What kind of bumps are you running in back?
Sent from my LG-H931 using Tapatalk
Yea the mud flapStock bumps. Wanting king bumps but pretty sure I don’t need them yet. As far as what did I use, do you mean the mud flap?
Sent from my iPhone using WAYALIFE mobile app
Yea the mud flap
Sent from my LG-H931 using Tapatalk
Ty man and you put it above strengthening bracket and tub?Got one from local auto store. Cut off two 3” or so square prices.
Sent from my iPhone using WAYALIFE mobile app