It's not exactly hard to find with the info I posted. If google searching was too complicated, then buy the PSC and have someone install it because there is no way you'll be able to do the DIY setup. On the other hand, the DIY setup cost me about $500, including 2x the amount needed of Royal Purple fluid. I am happy to answer any specific questions people might have along the way, but the bulk of the info is on the aforementioned thread in the other forum. When I did mine, I bugged PSC enough on the phone that they began making the 1.5" x 6.75" ram again (They had stopped for a while because they wanted you to buy their $2k setup instead of their $190 ram) and got the first one out the door. The single pass 12" derale aluminum tubular heat sink cooler is plenty for this setup. Check out summit racing for that, or amazon/eBay (I think it was $50 ish). I got my high pressure hoses from West Texas for $45 plus shipping. Just tell them you want the Jk hose kit. Got my pre 2009 rebuildable gear box from a guy on another forum for like $75, already rebuilt.
Thanks Strizzy for the backup.