I'd tell them to fix it or give me a new one then lol. That or you could tell them if you get in a wreck because your vehicle failed to maneuver correctly that would be a bad lawsuit after the news finds out your vehicle was deemed fine.
Lol read eddies write up on Chrysler dealerships.
you have a lot more patience than I do if it's been 200+ days, I would have contacted the state AG at 30 days and definitely would have been calling Chrysler after the 3rd attempt and let them know I was going to pursue Lemon Law with the AG.
I had to do that on a brand new 2005 GC that had a non-working 4x4 because the dealer told me it was too new and parts were not available. After calling Chrysler and leaving a message I was going to contact the AG and State Consumer Affairs and begin Lemon Law procedures I had a call back the same day and the needed part the next morning. Funny part, when the service manager called me to let me know they had received the part he acted like it was his doing - of course I busted his balls and called BS on him lol.
in a nut shell ".... authorized dealer cannot repair the vehicle after three attempts or the vehicle is out of service for repairs for a cumulative total of 30 or more days during the term of protection...."
there's more to it but I would have contacted the AG or state consumer affairs long ago.
Drive to the dealer wreck into a bunch of new grand cherokee srt8s or Rubicon and say you couldnt turn correctly because of the steering
The vehicle has spent over 200 days in the shop - I'm assuming they looked at things like ball joints but I can ask.
The issue is a constant torque on the wheel which leads me to believe it's not something like ball joints. If it were I'd suspect the issue would go both ways depending on the road etc.
How would ball joints be trashed out of the assembly line anyways?
From day 1 and you have 36k miles on it and it still isnt resolved? Wow
YouTube is fine, I need to see this
In the YouTube app or the YouTube Capture app?
You'll have to tell me how to get a nice quality video on here.
In the mean time; I let go of the wheel at the end of the railing on the right:
http://youtu.be/TVX3lZU4HaI